Hp pavilion g6 2500 w7 installation. Tips on how to reinstall Windows on an HP laptop yourself. Figure: Acceptance of licensing terms

Install Windows 10 on a computer that came with Windows 8.1 or Windows 7 using the instructions provided in this document.

Important information for installing Windows 10

Please read the following important information before beginning installation:

Make sure you have created backups important files.

Attention!

To avoid losing important information, always back up your data (personal files, photos, videos, documents, applications, etc.) before starting work. software etc.). See the article Backing up files in Windows 10 and 8 for more information.

• HP provides installation instructions, compatible software, and updated drivers for most computers sold after August 2013.

  If you purchased your computer before August 2013, HP has not tested or developed drivers for your tablet model. Some features may not work or the installation may not complete successfully.

  Make sure you have installed the latest drivers for your Windows 7 or Windows 8.1 device using HP Support Assistant, or download them from the HP customer support site.

  Update your antivirus software and related virus definitions before you install Windows 10. Turn on your antivirus app to automatically update. For more information, visit your antivirus software manufacturer's website.

  If you use HP ProtectTools or other security applications to encrypt data on your hard drive, you must decrypt the data on your hard drive before installation.

  If you require assistance from HP after installation, HP technical support may request that you restore the original Windows operating system to ensure the device is working properly. If your computer is sent to service or is being repaired after installing Windows 10, it is possible to restore from an image of the original Windows operating system, which will remove Windows 10. After repair, you can reinstall Windows 10. You must remember your username and password account Microsoft. To reset your password, see HP Step-by-Step Solutions - Can't Sign In to Windows.

  Once you install Windows 10, updates and security patches from Microsoft will download automatically. You cannot unsubscribe from this service.

  If you need to restore the original operating system, it's best to obtain HP recovery media first before installing Windows 10. For information about creating recovery media, see Obtain HP Recovery Discs or an HP USB Recovery Disc.

  Not all Windows 10 features are available on computers. Your Windows 10 experience is determined by the capabilities of your computer.

  Applications are purchased separately.

  Programs made for Windows 8.1 or earlier operating systems may not work after installing Windows 10.

  If you installed third-party software on your HP computer after purchasing it, you should check with the software vendor to ensure that the software will be supported on Windows 10.

  Some graphics devices do not support the new WDDM 2.0 driver model. Although these graphics devices will work in Windows environment 10, it will not give the computer the performance benefits available with devices that support WDDM 2.0.

  You may not be able to watch DVD movies after installing Windows 10. If you currently If you are using a DVD codec to play DVD movies, such as the encoder included with Windows 7 Pro, this encoder may not be available on Windows 10. To play DVDs after installation, you must install new player Windows Store media or other trusted source.

  After installing Windows 10 OS Windows application Media Center will not be supported. It will be deleted during installation and will not be able to be installed again.

  For computers with 128 GB or less available storage, installation may require HDD USB (32 GB and above). HP does not recommend using an SD card.

  SD card slots may not work after installing Windows 10. Therefore, we recommend using only external USB or microUSB storage, not SD cards, to install Windows 10.

  Microsoft has included in Windows 10 free application for voice recording, which can be used to record conversations, classroom lectures, meetings, and voice notes. This application may not work properly on all computers. If your device doesn't have recording functionality, check for a new driver in Windows Update.

  Facial authentication requires certain equipment, such as an infrared camera. If your computer does not have this hardware installed, the option to set up Face Authentication in the Settings app will not be available.

  Fingerprint authentication can be configured in the Settings app for computers equipped with fingerprint readers that support both scanning and swiping. If the option to set up a fingerprint reader in the Settings app isn't available, you may need to update the security software on your computer. On Windows 10, download and install the latest HP SimplePass or Digital Persona software. If you are using security software from another manufacturer, contact the manufacturer of that software.

  Cortana, your personal assistant, requires certain hardware, such as a microphone, speakers, GPS, and an Internet connection. To use Cortana on your computer, you may need to configure your microphone. The result will depend on the characteristics of the individual microphone. Cortana may not be available in some countries or regions.

  In Windows 10, wireless display connection (Miracast) may not be possible and the connection may be lost. Video and wireless drivers will need to be updated to function. Check Windows Update for the latest drivers and install them if available.

  Microsoft update and reset may not restore your HP system's drivers and settings properly. To restore the factory image, you should use only HP Recovery Manager, and to roll back to Windows 8.1, use the Rollback feature. After the rollback period has passed, use HP Recovery Manager (if available) and reinstall Windows 10 if an update is necessary.

  The precision multi-finger touchpad, a new feature in Windows 10, provides precision input and support for new gesture features. Your computer does not meet the hardware requirements to support a precision touchpad. This feature requires certain hardware to work on Windows 10. In Windows 10, your touchpad will work properly.

  Computers equipped Intel processors Broadwell (Intel Core i3-5xxx, Core i5-5xxx, Core i7-5xxx; Pentium 38xx, Celeron 37xx/32xx) or Haswell (Intel Core i3-4xxx, i5-4xxx, i7-4xxx; Pentium 35xx, Celeron 29xx) and 32-bit versions of Windows 8.1 do not support installing Windows 10 using Windows Update. To install Windows 10 64-bit, purchase Windows 10 64-bit from Microsoft and follow clean install 64-bit Windows versions 10 from Microsoft download site. In some cases, HP may not provide compatible software and updated drivers for your model.

  Some computers with IDT audio controllers may not support full functionality after installing Windows 10. Windows Driver 10 will allow sound to work on your computer, but some features will not work.

  On convertible, 2-in-1, and x360 laptops, the Continuum feature in Windows 10 may not be automatically detected when the computer is in tablet or desktop mode. You can manually switch between modes in the Help Center.

  Some computers will not support DirectX 12. You may not be able to access some new XBOX app features, or you may not be able to use apps that require DirectX 12.

System requirements

Microsoft requires that when you begin installing Windows 10, you ensure that your computer's configuration meets the following: minimum requirements to the system.

Steps to take before installation

Before installing Windows 10, update your software, drivers and BIOS, create recovery discs for your current operating system, and back up your files. You can also decrypt your hard drive.

Step 1: Install the latest software updates and drivers from HP Support Assistant

Step 3: Create recovery discs and backup important files

Create recovery discs and use File History to back up your data.

If you haven't already done so, create Windows 8.1 or Windows 7 system recovery discs, or save the recovery image to a USB storage device. If a problem occurs during system installation, you can restore your computer's configuration using HP recovery discs. For information about creating a recovery solution, see Obtaining HP Recovery Discs or an HP USB Recovery Drive.

You can use File History to back up your files and transfer them to Windows 10. To back up your files, see Back up your files (Windows 10, 8).

Step 4: Decrypt your hard drive (if applicable)

Windows 10 installation will not complete if the hard drive is encrypted. If you encrypted your hard drive, you must decrypt the hard drive before you begin installation.

Installing from a USB drive or ISO file using the media creation tool

You can use the media creation tool to create media to install Windows, then use that media to install Windows 10.

Step 1: Create Windows installation media

Download the media creation tool, then create the installation media.

Note.

You can run the media creation tool and create media to install Windows on any computer.

Download tool.

Double-click the MediaCreationTool.exe file in your browser's download bar or in the Downloads folder on your computer to start the installation.

Accept the licensing terms.

Rice. : Acceptance of licensing terms

Select Create installation media (USB drive, DVD, or ISO file) for another computer, then click Next.

Rice. : Selecting "Create installation media (USB drive, DVD, or ISO file) for another computer"




1. Select the language, version, and architecture (64-bit or 32-bit) to install Windows 10, then click Next.

   
   

   Note.

   You can also insert a blank DVD, select the ISO file, and click Next. Installation from ISO media is intended for advanced users.

   Rice. : Select USB flash drive

   
   

2. Select the USB flash drive, then click Next.

   
   

3. After the media creation tool finishes creating the USB installation drive, click Finish.

   Rice. : Click "Done"

   
   

Proceed to the next step to install Windows 10 on your computer using the installation media.

Step 2: Install Windows 10 on your computer

Windows 10 Setup allows you to perform a clean installation of Windows 10 (erasing all data) or keeping your personal files and applications (HP still recommends backing up everything to avoid data loss).

Note.

If you are prompted to enter your Windows 10 product key, enter your product key and click Next.

Note.

If your computer has less than 128 GB of free space left, you will be prompted to connect hard drive USB to continue installation. Use a blank USB hard drive of 32GB or larger. Once installation is complete, the Windows 10 update copies the windows.old file to your USB hard drive. Save this file to your USB hard drive. The file is necessary if you plan to revert to a previous operating system.

Step 3: Complete setup and sign in to Windows 10 (clean install only)

If you chose a clean install without saving any data, go to the setup interface using Cortana. If you choose to keep your personal files and apps, there's no need to set up Windows 10 again.

Windows activation

To confirm that your genuine Windows 10 OS was not installed on more devices than licensed, Windows 10 OS must be activated. Depending on where you purchased your copy of Windows 10, activation is performed either by a granted digital permission or by entering a 25-character product key.

See the HP support document Windows 10 Product Activation for more information about Windows activation 10.

Windows Hello

You can use Windows Hello to unlock your computer with your fingerprint or face without using a password. This is a much more personal and secure way to unlock your Windows 10 device. If your computer has the hardware needed to Windows operation Hello, during the installation of Windows 10 you will be asked about Windows setup Hello.

If Windows Hello doesn't activate automatically and you need to use facial recognition or a fingerprint scanner, follow the instructions below after activating Windows 10.

HP Customer Support, select page Programs and drivers and enter your computer model number. Download and install Windows 10 video drivers on your computer.

How to boot an HP Pavillion laptop from a flash drive or disk? Hello admin! I suffered all day today with the HP Pavillion laptop, I want to install an operating system on it Windows system 7 instead of the currently installed Windows 8. I connect a proven bootable Windows 7 flash drive to a USB 2.0 port, then reboot the laptop and often press the ESC key.

I get to the “start menu”, now I press F-9 Boot Device Options (change boot settings),

I get to the boot menu, but my Kingston flash drive is not there, although it is already connected to the laptop (the flash drive is definitely bootable).

The same thing happens with boot disk Windows 7.
So I’m thinking “a miracle of hostile technology”, then I’ll do it differently, change the boot priority directly in the UEFI BIOS, reboot the laptop, then press ESC again when loading, get to the “start menu”, now press F-10 BIOS Setup

And I enter the UEFI BIOS and select the System Configuration option, and in it the Boot Options tab, I go into it.

As you can see, the Secure Boot option in the BIOS is enabled,

I disable it, set it to the “Disabled” position, and set the “Legacy support” option to the “Enabled” position, a warning appears, select Yes,

Then I press F-10 (I save the settings, press Yes and reboot),

After the reboot, this window appears with the message
A change to the operating system secure boot mode is pending. Please enter the pass code displayed below to complete the change. If you did not initiate this request, press the ESC key to continue without accepting the pending change

I pressed ESC, Enter, and other keys, everything is useless, the laptop reboots and loads the Windows 8 operating system. And if you enter the UEFI BIOS again, then everything is unchanged there, the Secure Boot option is Enabled, and “Legacy” support" is disabled Disabled, that is, as if I did not change anything.

I ask you to explain to me, a simple user, why I can’t boot HP Pavillion laptop from flash drive, why don’t the UEFI BIOS settings change, what am I doing wrong? And most importantly, why on a laptop with a UEFI BIOS you can only install Windows 8, and no other operating system, you have to “knock yourself out” like this and waste your “nerve” cells. Tolyanych from Vitebsk.

How to boot an HP Pavillion laptop from a flash drive or disk

Hello friends! Our reader does everything right until the last screenshot. It was only necessary to correctly translate this message:

"For change safe mode download, please enter the code below to complete the change. If you did not send this request (for a change), then press ESC to exit without changing." I think you already understand that in this message we are asked to enter this code 8721 on the laptop keyboard (in your case the code will naturally be different) and press Enter, after this your changes in the UEFI BIOS settings will be saved and the laptop will reboot,

and after the reboot, press ESC, get to the “start menu”, press F-9 Boot Device Options (change boot settings),

We get to the boot menu and our Kingston flash drive is already present here, select it and press Enter, our laptop boots from the flash drive.

Found instructions on the Internet "Installing Windows 7 on an HP Pavilion g6-2364sr laptop" :

1. IN BIOS By "F10".

2. Easy installation in "UEFI Boot Order" downloads from "CD/DVD ROM Drive" will do nothing (subsection "Legacy
"Boot Order" not active). Loading only occurs from OS boot manager . Let's look carefully at BIOS -e for a new one
menu item "Secure Boot" , which is included in this case. IN BIOS -e HP Pavilion g6-2364sr provided
the ability to disable this insidious service. Disable Secure Boot "Disabled"

4. Afterwards we turn it on Legacy Support

5. IN Legacy Support We set the boot the way we need it and boot from external media.
************************************************** *******

So, booting from the distribution disk "Windows 7 SP1 64-bit" we have:

Then I used heavy artillery - utility diskpart:

************************************************** *******
You launch the installation disk with "Windows 7" When the rewind screen appears "Install"
select the item below "Recovery" ...
Do not select automatic problem fixing because... we need a second option.
A window will open with all sorts of tools, you choose among them command line.

1. In the black window that appears command line dial diskpart and press ENTER .
Attention! After this, the line before the flickering cursor will begin with DISKPART>

2. select disk # and press ENTER .
# is the number of the disk you want to reformat.
The number can be viewed using the command list disk.
(the same command will show which disk is protected GPT there will be a sign opposite it * )
For example, I wrote select disk 2
A line appeared
Disc 2 selected

3. clean and press ENTER . (ATTENTION! If the disk contains the necessary data, it will not be available later!)
A line appeared
DiskPart: Disk cleanup completed successfully.

4. create partition primary and press ENTER .
A line appeared
DiskPart: The specified partition was created successfully.

5. Everything from diskpart-a and the command line you can exit: exit, ENTER, exit, ENTER.
Now you can reinstall the system.
************************************************** *******

The following appeared:

How to be bro?

P.S. A little about the laptop itself: