How to insert a SIM card into an iPhone? Instructions and tips. How to remove a SIM card from an iPhone? Where is the SIM card inserted into the iPhone 5s?

Articles and Lifehacks

If we purchased a smartphone from Apple, we will not need to remove the back cover and battery at all in order to install a SIM card.

Our article today will tell you how to insert a SIM card into an iPhone 6, as well as the features of its format in the new generation of Apple mobile devices.

How to cut a SIM card

• It is well known that Apple has already patented a system for automatically ejecting the SIM card tray, but it has not been implemented in the new smartphone.
• The user is still asked to use a special paperclip included in the package (which is not always convenient, given that you need to carry it with you).
• However, for security reasons, it is allowed to remove the SIM card only after passing a special identification procedure (for example, using a fingerprint read by a fingerprint scanner).
• Let's start with the fact that the iPhone 6 supports a nano-SIM SIM card (like the iPhone 5). You can make it from the most ordinary SIM card, cutting it to the required size. It measures 12.3 x 8.8 millimeters and is 0.67 millimeters thick.
• For cutting yourself, you will need scissors, a stencil, a compass and sandpaper. In this case, it is very important to strictly adhere to the established dimensions, otherwise you can damage the SIM card.
• Sandpaper will help remove the thickness, and scissors will help trim off excess edges. In addition, you can purchase a special machine for cutting SIM cards (you can easily order it online).
• Let us add that if we are afraid of damaging the SIM card, then it is better to take it to any nearest communication store, where specialists will help to cut it.

Insert the SIM card into the device

1. The device has a special tray for installing a SIM card. It is located at the end of the smartphone on the right side. To pry it off and open it, we need a paper clip that comes with the device.
2. Instead, you can use a paper clip or other handy tool.
3. Once we have removed the tray, we place the SIM card there and carefully push the tray back. A slight click should be heard at the end.
4. After we install the SIM card, we can proceed to the initial setup of the mobile device. Let’s add that before installing the SIM card, you don’t need to turn off the iPhone like other devices.

Before thinking about how to upload your photos or, the user should take care of ensuring the main function of the device: the ability to make voice calls and send text messages. Both are impossible without installation in iPhone SIM cards- not only an Apple specialist, but also the owner of the phone can place it in the slot correctly. Let’s try to figure out how to insert a SIM card into an iPhone or change an existing one.

Preparing for the first launch

The first thing the happy owner of an iPhone needs to do is turn off the device by holding down the power button. You can also open a slot “for profit”, but in this case the likelihood of failures in further work sharply increases; It’s better to be patient and act strictly in accordance with the manufacturer’s recommendations - fortunately, it’s also not difficult.

Important: You can insert and remove a SIM card into your iPhone without opening the cover of the device. The owner of the phone just needs to follow the simple instructions below - and not unnecessarily get involved in a rather complex system of cables and radio components.

The power button is located, depending on the device model, on the top end (older versions) or at the top right (more modern ones). You need to hold it down until the prompt to turn off the phone appears - then, after waiting until the screen goes out, proceed to further manipulations.

Determining the SIM card format

The next thing the iPhone owner must do is determine required format SIM cards To do this, you need to carefully examine your existing SIM card and check the accepted terminology:

• if the SIM card has not yet been broken out of the holder, it is simply called SIM - in modern iPhones and smartphones based on the Android OS this format is not used (number 1);
• SIM cards of the usual size (15 × 25 millimeters) are called mini-SIM and are installed in third-generation devices that are clearly not related to (number 2);
• smaller SIM cards (12 × 15 millimeters) are micro-SIMs used in fourth-generation iPhones (number 3);
• SIM cards measuring 12.3 × 8.9 millimeters are called nano-SIM and are used in new iPhone models, starting from the fifth generation (number 4).

Quite often mini-SIM is simply called SIM; At the same time, the classification of other SIM cards remains unchanged.

Important: a user purchasing a new SIM card for iPhone need not worry about compatibility. The original mini-SIM does not even need to be cut to fit your device - just carefully break it out to the required size, not forgetting to save the frame just in case - it may come in handy when switching to another device.

If the SIM card is old, you should not cut it manually - there is a high risk of damaging the chip. It would be much more reasonable to take the SIM card to any service center or, if funds allow, to purchase a device for adjusting the format at home.

Advice: You should not break out SIM cards from the holders until the slot is removed from the iPhone - there is always a possibility of making a mistake with the size. If you need to “grow” a SIM card from a smaller size to a larger one, just insert it back into a suitable frame - the one from which it was removed, or any one that is at hand.

SIM card installation process

Now, having decided on the SIM card format for the iPhone, you can proceed to the main thing - try to insert it into the slot. This is not as difficult as it might seem - much easier than. The user needs:

• Find on the right side of the device (in new models - immediately under the on/off button) a small hole, the diameter of which fits a regular paper clip.

• Take the special paperclip supplied with the device - or, as just mentioned, a paper clip - insert the sharp end into this hole and press down without applying unreasonable force.

• Wait for the characteristic quiet click, accompanied by the detachment of the front cover of the slot from the end, and carefully remove the SIM card holder.

• Once again, check the required size of the SIM card, break it out of the frame and insert it into the slot - it will fall along the guides on its own.

• Carefully insert the slot back into the iPhone until you hear a slight click. Now you can turn on the phone by pressing the corresponding button and start working as usual.

Great! The SIM card is installed in the device and after a few seconds it must be authorized by the operator. Having successfully completed the task, the user should not stop there - it is much better to expand his knowledge by learning how to properly use this multifunctional service.

How to insert a SIM card into an iPhone - video

And to be sure to insert a SIM card into your iPhone quickly and without difficulty, you should watch this short video

None will work without a SIM card mobile phone. Or rather, it will work, but it will not perform its main function. Given the variety of SIM card slots and formats, it is important to know how to insert a SIM card into an iPhone. There is nothing complicated about this, but some points require clarification.

Note that modern smartphones (especially iPhones) are undemanding to this process. For example, old Nokia phones in this regard were incredibly difficult. I had to worry a lot and look for a slot where to insert a SIM card. Everything in the iPhone is provided for the convenience of the user: there is no need to remove the back cover, and the kit even comes with a special tool for removing the tray. However, the tray itself was not invented by Apple. The same Nokia company was the first to implement a removable tray. But this is a past story, and we will move directly to the question itself.

Types of SIM cards

First of all, please note that different iPhones use SIM cards of different sizes. The third generation of Apple phones worked with regular-sized SIM cards. Then came the fourth generation of phones that could only accept Micro Sim cards. Further, the fifth, sixth and seventh generations only work with Nano Sim cards.

All these cards differ from each other only in size: width, length, thickness. Therefore, when purchasing a starter pack, it is important to check with the seller so that he sells the card in the size you need. Some starter packages come with cards of all sizes at the same time: that is, there are special bending lines along which you can break out a card for your phone.

Will a regular SIM card fit into the Micro SIM slot?

During the shortage of Nano and Micro SIM formats, people did not know how to insert a regular-sized SIM card into an iPhone, but they still found a way out. They simply cut a regular large SIM card to the required size and inserted it into the phone. Even the metal contact had to be cut off. Surprisingly, it worked and the phone perfectly received the signal from the desired operator. Even today, a regular standard sized generic SIM card can be cut down to Nano or Micro SIM size and it will work.

But there is no such need now. Operators sell SIM cards of all sizes. What if you still have an old SIM card? big size, and you bought a phone where it does not go, then in any salon mobile communications They will replace it with the size you need. In this case, you don’t need to know how to insert a SIM card into an iPhone. They can even do this in a store, and you just have to watch.

Installing a SIM card

So, how to insert a SIM card into an iPhone? In the box, the phone always comes with a paperclip (it is also called (iScrepka), with which the tray is opened. This paperclip can be noticed by something else: a pin, a needle, nail scissors, even a toothpick. But this can simply damage the tray. It is located with right side (on the side of the phone).

We take our paperclip, insert it into the hole of the tray (a very small hole), press down a little, after which the tray will come out a few millimeters. Then simply remove it completely with your hands.

When you have the tray in your hands, place the SIM card in it. It is important that it is placed with the chip facing down, otherwise the card will not work. Although the tray is designed in such a way that it is impossible to insert a card in any other way, some users manage to do it.

Now we insert the tray with the SIM card back into the slot and press it down a little.

Settings

Now we know how to insert a SIM card into an iPhone, but what to do next? Important: it is not necessary to turn off your phone. Previously, you had to remove the battery and only then insert the SIM card, but now there is no such need.

Once the SIM card is inside, the phone will ask you to unlock it. It is normal that it is blocked by default. To do this, you will need to enter a PIN code. You must know this code (it is indicated on the starter package), but if this is your old card, then you already know it for sure.

We enter the PIN code, the lock is removed and the phone finds the desired network. If the network cannot be found, then in the settings there is an “Operator” item. There you can select the operator to whom the card belongs. The default option is “Automatic”, and in this position everything should work fine. But there are also exceptions. Therefore, just select your operator and the phone will immediately find the network. But if problems arise and you still don’t know how to insert a SIM card into the iPhone 5S, then move on to the next point.

If the SIM card is not detected

If, after performing the manipulations and even selecting an operator, the phone writes: “No network,” then this means that you inserted the card incorrectly or the SIM card is not working. But it can be even worse: this is when the phone is tied to another operator and can only see its SIM cards.

Yes, it's unpleasant, but there's nothing wrong with it. They learned how to remove a lock a long time ago, so special slots for iPhones are sold on radio markets, with which even a locked phone will work with any operator. Such a tray is inexpensive - about 150-200 rubles. The kit includes the tray itself, a special chip spacer for the SIM card, and a paper clip.

This article describes in as much detail as possible how to insert a SIM card into an iPhone 6, but these instructions are valid for all models.

Finally, the treasured white box with the long-awaited iPhone 6 is in your hands. All that's left to do is set it up and use it for your own pleasure. It is clear that first of all you need to insert a SIM card.

What card is in the “sixes”?

You ask, “What kind of SIM card should be in the iPhone 6?” In the “sixes”, as well as in their predecessor, the iPhone 5 series, instead of a regular card, they use nano-sim, developed with the support of Apple, and launched in 2012. They differ, first of all, in size - nano is much more compact and thinner than the standard one. It has parameters of 12.3 × 8.8 × 0.67 mm. In all other respects, the principles of their operation are identical, there are simply no plastic rims around the metal carrier with the chip, and the security parameters are slightly improved.

It is best, of course, to insert the original nano-SIM into the iPhone; it looks like this.

Trimming

The cost of replacing a standard SIM card with a nano, in the same MTS, for example, costs a lot - 24,300 rubles.

Therefore, many people prefer to cut it to the desired format themselves. This will take literally a few minutes, and does not require any special skills or equipment - the entire procedure is performed with ordinary kitchen scissors.

This is what “modifications” look like, which you can do on your own - just trim the edges. For “sixes” the one on the far right is suitable.

Many service companies offer to quickly and efficiently “adjust the nano-size” to the sixth iPhone for little money.

If you decide to cut it yourself, do not forget to first mark the characteristic beveled corner - you can put a dot on the reverse plastic side with a marker. We also recommend making something like a pattern - for the nano-sim parameters indicated above. This will make cutting it out much easier and less likely to make a mistake.

But here is an original solution from K. Ropp, which helps to quickly cope with the task.

Simply select the desired size and make markings along the intersection lines. The fit is almost perfect this way. And the likelihood of damaging important elements of the chip is minimized.

It’s better to cut with a small allowance, and then sand off any excess with sandpaper. Even if you go a little onto the metal surface, it’s okay. Usually the chip is placed in the center and will not be damaged.

After trimming and grinding the ends, remove a little thickness from the reverse plastic socket, since the factory SIM card, and therefore the slot for it in the iPhone, is 0.09 mm thinner - that’s what needs to be removed. If you do not do this, you will then not be able to open the port and remove the stuck card. We recommend inserting it into the tray from time to time and adjusting it so that it does not protrude above its metal side, and it can then be pulled out. After that, thoroughly wipe it from dust and that’s it - the nano-sim can be used.

How to install it?

So, the card is ready - all that remains is to install it. Schematically, you can remove the nano-socket like this.

In order to open the receiving tray you will need a special needle included in the kit.

With its help, you can safely remove the tray from the iPhone into which you need to insert a SIM card. However, many do not find it in the package, but it is there, it’s just not immediately visible.

All you need to do is take out the instructions and pull them out of the paper holder in the center.

So, in order to open the nano-card tray, you need to insert a pin into the hole located on the side, on the right side of the iPhone display, and press firmly.

After a slight click, the outer plug will move slightly away from the body and can be easily removed.

If the original iPhone needle is lost, the same thing can be done using a regular paperclip (needles with sharp edges cannot be used).

Recommendations

Regarding the SIM card, there are several important points.

2.If you plan to trim an existing one yourself, follow the manipulations we described. It must “sit” tightly in the tray, otherwise, at a minimum, you will have problems with communication, and in the worst case, the port will be damaged.

3. Very carefully go around the places with metal contacts, do not forget to “scrape off” the excess thickness only on the side where the plastic is. Walking on metal will probably ruin your SIM card.

4. Please be aware that older cards may no longer work after being trimmed.

So, your dream has finally come true: you have become the proud owner of a beautiful iPhone 4 from Apple. Such smartphones really stand apart in the mobile device market and deserve special attention. And this is thanks not only to their extraordinary functionality, but also to the special approach that this miracle requires from the user. Handling the iPhone can be a little more difficult than with devices on platforms that are more familiar to us. But after a short period of time, getting used to the device, any user is convinced of its extraordinary simplicity and practicality.

Getting Started with iPhone

The first step in using a brand new smartphone is, of course, to turn it on. This must be done before inserting the SIM card into the device. On the iPhone 4, the on and off button is located at the top of the case, like any other device from this company. The key must be pressed and held for several seconds until the company logo appears on the display. After this, you will see a message telling you that you need to make a special gesture to turn on the device. After following all the instructions, your iPhone will be activated.

Installing the card

If you have just purchased an Apple device, the first question that usually arises concerns how to insert a SIM card into the iPhone 4. These smartphones are designed in a slightly more cunning way than the rest of their technical counterparts that are more familiar to us. You probably noticed that the communicator comes with a small metal key, something like a paper clip. This is the solution to installing a SIM card. Take a closer look at your new smartphone. On the right side you will notice a small secret hole. To understand 4, you need to press the hole with this same metal key. After pressing, you will find a card slot that opens. By the way, if you lose your key, which happens quite often, a regular paper clip will do. When opening the SIM card tray, be careful to avoid damaging it, otherwise opening it later will be very problematic. After installing the card, push the cover back until it clicks. The search must be displayed on the display mobile network. This means that the SIM card for iPhone 4 is installed correctly. If the device displays a message about the absence of a card, it may still be installed incorrectly.

The usual solution won't work

If you have already figured out how to insert a SIM card into the iPhone 4, you probably realized that for this device you need to purchase not an ordinary classic format card, but a special micro one. In any mobile phone store you can purchase a “mini” that is suitable for the iPhone 4. Some sellers offer to buy a “number” at the same time as mobile device, which will undoubtedly be the most convenient option. The micro-SIM card has dimensions of 15x12 millimeters, which is much smaller than the standard options.

Cutting off the “number”

Sometimes, when changing a device, the user does not want to change the SIM card, so to use it on a new device, it is necessary to adapt the format to micro. Of course, you can go to your operator’s salon and write an application to change the SIM card while keeping the number, but this requires a certain amount of time, so most people prefer to simply reduce the card.

You can again cut a SIM card for iPhone 4 directly when purchasing the device. Almost all sellers provide this service. You can do this yourself. In this case, you must be as careful as possible so as not to damage the chip. Otherwise, you can safely throw away the card. Trimming is a very delicate matter, so the best decision would be to turn to professionals, since they have special templates that can easily be adjusted to the size of the card.

So, if you have finally figured out how to insert a SIM card into the iPhone 4, turned on the new device and prepared a “number” in micro-SIM format, you can accept congratulations on the purchase of a wonderful smartphone. By the way, you have probably already noted a special advantage with this arrangement of the card in the phone: now, if you need to change the SIM card or remove it, you do not have to completely turn off the device and remove the battery, as is done in any other device. With subsequent use of the iPhone, you will discover many more positive aspects of this mobile device.