How to write capital Latin letters on a computer. How to make capital letters? Convert lowercase letters to uppercase

»Capital, uppercase, uppercase, lowercase letters, how to put emphasis

IN text editor Word can use both uppercase and lowercase letters. Thanks to the functionality of the program, you can convert symbol variants with a simple keyboard shortcut.

To quickly convert a block of text, you need to use a combination of buttons Shift+F3 . This command is usually applied to a selected piece of text or a single word.

Single click combinations will allow you to make the very first letter of the word in lowercase format, and repeated will make all characters in uppercase.

To carry out this operation, you can go to the menu Format-Register. This command can call up a special dialog menu in which specific packages of all letter design options are located. Changes can only be applied to the selected text element.

How to put an accent

To add stress to a word in Word, follow our instructions.

• Place the mouse cursor AFTER the letter over which the accent mark will appear.
• Next "Insert" - "Symbol".
• Select the symbol you need. To avoid searching for a long time, you can immediately enter the code 0301.
• Insert.

While entering text, you periodically have to change the case of letters. To switch between input modes for lowercase (small) and uppercase (capital, large) letters, use the Caps Lock key. If the capital letter input mode is turned on, the signal light of the same name lights up in the upper right corner of the keyboard and capital characters are entered. Pressing the Caps Lock key switches to lowercase letter input mode. The signal light goes out and lowercase letters are entered.

For temporary switching between cases when you need, for example, to enter only one capital letter at the beginning of a sentence, you should use a different method. Temporary switching is carried out by simultaneously pressing the left or right Shift key and the key of the character being entered. If the keyboard is configured to work in capital letter mode, then the described method leads to a temporary switch to lower case letter mode. Conversely, if the keyboard is configured to work in lowercase mode, it will temporarily switch to uppercase mode. Holding down the Shift key allows you to enter an arbitrary number of letters in a different case. However, to enter a large number of letters, it is better to constantly switch using the CapsLock key.

Text can be typed in different programs: WordPad, OpenOffice, Microsoft Office or Notepad, but the keyboard capabilities remain the same in all of these programs. It switches from Russian to English by simultaneously pressing two keys: usually Alt/Shift or Crtl/Shift. There are also key combinations for switching case on the keyboard, which we will discuss below.

How to make capital letters on your keyboard

If we carefully examine all the labels on the keyboard buttons, we will find several keys with strange designations - service keys. Some of them will help us make lowercase and capital letters.

By default, all letters are printed small - lowercase. To capitalize the first letter, you need to simultaneously press two keys: the letter and Shift. Shift switches registers. However, the size of the numbers does not change. If you press Shift and a number at the same time, some punctuation mark will appear on the screen. Which one exactly depends on the keyboard layout and the language in which the text is currently being typed.

The keyboard layout can be changed through the "Control Panel" on the "Keyboard" tab, but do not rush to do this. As a rule, by default, when you press Shift/number, the character that is shown on the key is printed. With the English layout, the sign shown above the number is printed, and with the Russian layout, the sign on the key next to the number is printed.

If you need to capitalize not only the first, but all the letters in the text, you will have to type with one hand, because... the other will keep Shift pressed all the time. But this is inconvenient, so there is a Caps Lock key on the keyboard. If you press it, all letters will be printed in capitals. Only the number keys will not be affected by Caps Lock. If you also press Shift while holding Caps Lock, a small letter or punctuation mark will be printed on the number keys.

If Caps Lock is pressed, an indicator on the keyboard lights up, by which you can always find out which letters you are about to start typing.

How to capitalize letters using Office

Microsoft Office is a very convenient program: sometimes it corrects some errors itself or allows you to do it faster. For example, if you forget to capitalize the letter at the beginning of the name or the name of the city, then the Office itself will correct the error: it will change the small letter to a capital one.

But here you need to be careful, because... The office can overdo it. For example, in the words split system, he will definitely try to write Split with a capital letter, considering it the name of the city. The same thing will happen if we are talking about a Trojan virus: after all, Trojan is a name! If you write more often about viruses than about ancient heroes, then you should add “Trojan” with a small letter to the Word dictionary. To do this, right-click on the word and select “Add to dictionary” in the menu that opens.

If you find that you forgot to capitalize the first letters where they are needed, you can use the Word menu. Highlight text typed in incorrect case. In the “Format” tab, select “Register”. A window will pop up offering several options for changing the register to choose from. All that remains is to check the box the desired option, for example, “MAKE ALL LETTERS IN CAPITAL” (upper case). There you can completely change the register.

Although the Excel program belongs to Microsoft Office, all these Word software tools do not work in it. There you need to type text in the cells, like in Notepad. Therefore, if you forget to capitalize letters in Excel, you will have to correct it manually.

What are Roman numerals? These are the numbers that were used by the ancient Romans in a non-positional number system. Roman numerals have several interesting features and one of them is that if a smaller digit comes before a larger one, then the smaller one is subtracted from the larger one, and if the smaller one comes after the larger one, then the two digits are added.

Roman numerals are still used today. For example, they are often used in dials or when writing stories, poems, problems, etc. Today we’ll talk about how to write Roman numerals on the keyboard.

Letters

First, let's remember how Roman numerals are designated:

• 1 - I

• 5 - V

• 10 - X

• 50 - L

• 100 - C

• 500 - D

• 1000 - M

Formally, Latin letters are used for designation, so they can be used to represent Roman numerals. To do this, I will give a few examples so that you can understand.

• Let's take the number 1 - this is the Latin letter I (capital letter i on the English layout).

• 2.3 - II and III, respectively.

• 4 is a combination of letters IV. You didn’t forget, did you forget that in this case the smaller one is subtracted from the larger number?

• 5 - V.

• 6 - VI. In a particular case, the numbers add up.

• 7.8 - VII and VIII, respectively.

• 9, 11 - IX and XI, respectively.

• 10 - X.

• 21 - XXI.

• 24, 26 - XXIV and XXVI.

• 34 - XXXIV.

• 51 - LI.

• 378 - CCCLXXVIII.

In general, I think the essence is clear to you. Using Roman numerals is not at all difficult if you do not forget the rules of construction.

ASCII codes

If you don't want to use Latin letters, you can use ASCII - this is a table in which you can find printable and non-printable numeric codes. It is available in any operating system Windows.

To use the codes, you need to do the following: enable Num Lock mode if it is disabled (this is a button on the keyboard).

Then press and hold the ALT key and type the appropriate combination of numbers on the secondary keyboard.

• 73 - I

• 86 - V

• 88 - X

• 76 - L

• 67 - C

• 68 - D

• 77 - M

This method is not very convenient, so it is easier to use capital letters.

Modern computers have become indispensable assistants for us in almost any activity. With the help of them we can spend our leisure time, make purchases, and most importantly, do work with documents.

Indispensable assistants in working with text

Depending on the type of activity, you can choose a specific software package. If you use Windows, Office applications immediately come to mind: Word, Excel, PowerPoint and others. It doesn't take a genius to master the basics of using these little programs. The developers tried to arrange all the tools as rationally and structuredly as possible.

For example, Word is one of the most popular. It is most often used for office work, but it is also perfect for home use. The good thing about the editor is that it is suitable for both professional work and for drafting the simplest documents. It is used everywhere by schoolchildren, students, journalists, copywriters, and bloggers. Thanks to its simplicity and intuitive interface, the editor is even used for quick sketches at home, for example, making a shopping list or writing down recipes.

At the same time, the capabilities of Word allow you to create complex graphics and diagrams, edit images and font styles, and much more. Today we will take a closer look at this editor and learn about small tricks in using it, for example, how to do everything in Word.

MS Word

The first version of Word was created back in 1983 by Richard Brody. Since then, more than one update has been released for this small program. The editor uses simple forms of the table-matrix algorithm. Today the program is one of the most practical and used in the world. And this is far from an accident.

Advantages of Word

Word integrates perfectly with other formats. So, version 2007 allows you to save the file in PDF format. The editor facilitates fairly fast and pleasant formatting of documents. The functionality is configured so that you can instantly change the document design style, insert a picture or media file.

MS Word provides a wide selection of SmartArt objects that are implemented in 3D format. Even a child can work with the editor, and if questions arise along the way, you can use the built-in assistant, which will explain step by step how to complete a particular task. You can also vary the file size and recover damaged documents. Automatic use of built-in formulas and hyperlinks, a table creation wizard, quick spell checking, print preview - all this and much more can be found in this text editor.

All these functions “lie on the surface,” but what happens if you “dig” deeper? For example, how to make capital letters Let's get acquainted with the little secrets of Word that will help make text editing much faster and easier.

How to make all letters capitalize in Word?

Many inexperienced users, having created text, do not know how to make certain adjustments to it. For example, how to make all letters capitalize in Word. So, they rewrite sentences again, wasting a lot of precious time. In order to solve this problem, there are several ways.

The first one is the CapsLook button on the keyboard. When you press it, you will immediately type in capital letters. This is very useful for designing headings or highlighting certain parts of text.

But it happens that you need to format the already entered text in the same way. How can I change letters to capital letters in Word if they are already typed? Not many people know that there are a number of hotkeys or their combinations for quickly performing a certain function in a text editor. Select the text you are going to change with your mouse. Then press Shift+F3. Ready! Now the letters have become capitalized. By the way, to select all the text, you can press Ctrl+A. There are other ways.

How to change letters to capital letters in Word using the mouse?

To do this, select the desired text, hover the mouse over it and press the right button. You will see a context menu, and in it - “Font”. A small additional text editor will open. You need to pay attention to the “Modification” item. In the third column, select "All caps", click "OK", and the letters will become capitalized.

The third way to make text in capital letters in Word is as follows. You should be in the "Home" tab. It is installed by default when opening a new document. Select the desired piece of text again. In the "Font" panel (where text is bolded, italicized, underlined, etc.) you will see a small icon with two letters "Aa" and a small down arrow. Click on it and select "ALL CAPITAL", this will change the letters immediately.

Now you know how to make text in capital letters in Word. But what about other little tricks?

In addition to such an interesting function as changing case, our text editor has a number of secrets. For example, using the combination Alt+7+6+9 you can add an accent. This is very convenient when writing literary text and legal documents. You can also put a password on the document to protect your personal information. This manipulation is available in the "File" menu. Using Ctrl+Z you can undo the last action. If you need to select a large piece of text (for example, more than one page), you can place the cursor at the beginning point and hold down the Shift button, then simply move to the end of the passage.

Now you know how to make all letters capitalize in Word. Create and edit text quickly and easily!