home › Wi-fi setup › How to configure the laptop lid closing functions. How to make sure that when closing the laptop it does not turn off? Why is this happening

How to configure the laptop lid closing functions. How to make sure that when closing the laptop it does not turn off? Why is this happening

Okay, back to the topic! In the settings, you can select only 4 actions that will occur the moment you close the lid of the laptop. Let's look at each of them briefly, without going into detail, and then we'll see where these settings are located in the operating room Windows system 7.

No action required. As you may have guessed, if you select this option, then when you close the lid, no action will occur. For example, you can turn on the music and close the laptop, the music will continue to play.

Sleep mode. Low power consumption mode, which can be exited by moving the mouse or pressing any button on the keyboard. In this mode, the laptop consumes electricity, but very little. The current session is recorded in RAM, and when exiting “Hibernation” it is unloaded and you can continue working.

Hibernation. If you select this mode, then when you close the laptop lid, the current session will be recorded on the hard drive, and the laptop itself will be completely turned off. When you turn on the laptop, the session will boot from hard drive and you can continue working further.

Shutdown. The well-known mode can be found if you open the Start menu. If you select this mode in the laptop lid settings, then when you close the lid, the laptop will turn off. Probably invented specifically for the lazy. I closed the lid, the laptop turned off, and there was no need to go to Start!

You can read more about each mode on the website "windows.microsoft.com" or visit the excellent site "wikipedia". Now let's go to the control panel and see where these settings are located.

Setting up the laptop when closing the lid.

Let's go to the menu " Start " and open " Control Panel "for convenience, specify " Small icons " and select " Power supply »

In the next window, in the menu on the right, select “ Action when closing the lid ».

Will open a window in which you can specify the actions you need to take when closing the lid.

You can specify different actions depending on the situation. If not connected to laptop Charger, then you can in the list “ On battery " choose " Dream" Then, when you close the lid with the charger not connected, the laptop will go into “Hibernation”. Likewise for the situation when “ memory» connected. You can select the action you need.

These simple steps are used to configure the actions when closing the laptop lid. This is where I will end this short post, good luck to everyone!!!

Modern PCs have a variety of functions; even advanced users cannot always understand some of their capabilities at first after purchase. One of them is aimed at saving energy consumption, therefore, according to standard time or a schedule specified by the user in the settings, the screen goes into the so-called “sleep mode”. However, it can sometimes interfere with work, forcing you to waste precious minutes turning on the PC and waiting for it to boot. How to prevent the laptop from turning off when closing the lid? This function was useful for those who very often use torrents or other similar services. To solve the problem, you need to consider all approaches.

Close the laptop without turning off

Typically, when you close the lid, the laptop goes into sleep mode, but not all users like this - some want it to continue running current processes. And the solution to the problem, in fact, looks very simple, you just need to familiarize yourself with the methods that will be described below.

Why does it turn off?

The bottom line is that, according to the standard, the OS (operating system) has parameters that are programmed for actions that occur in response to a specific event. If you close your laptop, it will go into sleep or hibernation, depending on the version of your operating system Windows.

Before answering the question of how to make sure that when closing the laptop lid it does not turn off, let’s figure out how these modes differ?

Distinctive features

Many users believe that these are the same functions, or at least simply confuse them. In order to deal with this problem once and for all, you need to familiarize yourself with some explanations that are relevant for most versions of Windows OS:

Sleep mode is used to save energy consumption; it works by reducing the level of consumption, and it also allows you to instantly resume work with one press of any key. To give some comparison, this option is extremely similar to the pause function in audio music players - the OS simply pauses all current operations, but continues to accept power in order to immediately return to work at the click of the user’s fingers.
But hibernation requires even less energy, since switching to this mode allows you to save everything open files and records of everyone running programs to your hard drive, and only then interrupts the power supply. As soon as the user needs to return to a working state, the OS will immediately load all the data that was saved and written to RAM (random access memory). This is very convenient for those times when you need to continue working where you left off.

Important! If you often have to spend a lot of time at your PC, you probably get bored with the picture on your monitor from time to time. You can easily replace it, and if you still haven’t figured it out, we suggest you use simple and understandable instructions with which you will definitely succeed:

How to keep the device running?

How to set the lid to close on a laptop? Everything is extremely simple - you won’t spend even three minutes solving the problem. The procedure is primitively understandable and does not require any special knowledge or experience from the user. It all depends only on the version of the OS you are currently working on.

Windows 10:

Go to the Start menu and go to Settings.
You need the first line, which is called “System”.
“Power and Sleep Mode” - find this item in the menu on the left.
We look down and see “Related settings” there, go there and select “Advanced power settings”.
A context menu will open in front of you, in which you will need to find the “Actions when closing the lid” tab.
Next, go to “System” - “Power and Sleep Mode” - “Related Settings”.
Find “Advanced power settings” at the bottom. Go to “Actions when closing the lid”, configure the computer so that all the parameters meet your individual needs.

Windows 8:

Go to “Explorer”, which is located in the “Start” call button menu, find the “Computer” section and click on it with LMB (left mouse button).
At the top you can find the “Control Panel” shortcut, you need to go there.
Now select the window called “Hardware and Sound” and go from there to the “Power Options” section.
In the “Action when closing the lid” menu, set the value to “No action required” and save all changes.

Windows 7:

We get to the “Control Panel” in the same way as described in previous versions.
We find the “Power Options” tab and find the already familiar “Actions when closing the lid” menu.
We do the same as in point No. 4 of the previous instructions and save the result.

Important! To rarely experience difficulties in working with your PC due to slowdowns and freezing of the operating system, take note of several practical ways to solve this problem:

Many of the users connect their laptops to external monitors for better usability and performance and prefer to use an external keyboard and mouse. Once connected, the laptop, even when using only the second screen - an external monitor, must remain open, since when the laptop lid is closed, it goes into a sleep state.

In truth, there is a provision in Windows 10 and earlier versions of the operating system that allows the device to work even after being closed without entering a sleep state. This feature comes in handy when you want to connect laptop to the second screen.

WHEN CLOSING THE LAPTOP COVER

The operating system remains in full working order if you simple settings some parameters. This is done in the following way. On System Panel tasks, find the battery icon, right-click on it and select “Power Options” from the context menu.

On the left side of the window, click the “Action when closing the lid” link. This will open the Power Button Settings and Enable Password Protection window. Find the item “When the lid is closed” and in the “On battery” and “On mains” columns, set the “No action required” option. Save your changes.

This is it! Now if you close your laptop, nothing will happen. You can connect it to an external monitor to continue working. I also listen to music when I don’t want to look at the screen.

When you close the lid, the laptop goes to sleep, but you want it to continue functioning as usual, performing current tasks? Read the tips below to learn how to close your laptop so it doesn't turn off.

Why is this happening

The fact is that by default operating systems have settings that specify certain actions for each event. When you close the lid, depending on the OS version, sleep or hibernation mode is activated.

What is the difference

Very often, users confuse these two functions or even think that they are the same thing. To finally understand the issue, it is worth making clarifications that are relevant for Windows OS, starting with Vista and higher.

Sleep mode is designed to save energy by reducing its consumption and will allow you to quickly resume normal operation when you press any key. If we draw analogies, this mode is very similar to the pause function in a video player - the system stops all operations, but does not completely stop the power supply and is ready to immediately return to normal mode at the user's request.

Hibernation requires the least amount of energy, since when entering this mode, the system saves open documents and data from all running programs to the hard drive, and then turns off the power supply. At the first request of the user, the computer turns on again, and the OS loads the saved data into RAM, which allows you to start working from where it left off.

How to keep your laptop closed

It will take you a maximum of five minutes to solve the problem. The operation is very simple and does not require special knowledge and skills. Depending on the OS version you have installed, go directly to the desired section.

Disable sleep/hibernation mode when closing the lid in Windows 10

Click Start and turn on Settings.
Go to the first section, which is called “System”.
In the left vertical menu Find the line “Power and sleep mode”.
At the bottom right, under Related Settings, click Advanced Power Options.
In the new window that opens, find the line “Actions when closing the lid” in the vertical menu on the left and click on it.
Find the item “When the lid is closed” and set the value to “No action required”. Don't forget to save your changes by clicking the appropriate button.

How to close your laptop so it works - Windows 8

Go to Explorer, find the line “Computer” in the left column and click on it.
On the panel at the top there will be a “Control Panel” icon, where you need to go.
In the window that opens, select the “Hardware and Sound” tab.
Go to the "Power Options" section.
In the menu on the left, click on the line “Actions when closing the lid.”
In the line “When closing the lid”, set the value to “No action required”.
Save your changes.

How to leave your laptop on with the lid closed - Windows 7

Go to Start and select Control Panel.
Go to the “Power Options” section;
On the left side of the window, select “Actions when closing the lid”;
Find the line “When the lid is closed” and set the value to “No action required”.
Save your changes.

48 723

As a rule, when you close the laptop lid, it goes into sleep mode. If you want it to continue working as usual, use the instructions below.

By default (if you haven’t changed anything in the operating system settings), when you close the laptop lid, it goes into “sleep” mode. However, you can choose the action that takes place:

No action required
Hibernation
Shutdown

Despite the similarity of sleep and hibernation, there are differences between them.

In sleep mode, the computer remains operational and consumes some power to maintain the state of the processor, RAM, and some other components.

In hibernation mode, the computer is completely de-energized, and its HDD an exact copy of the RAM state is recorded. When turned on, this information is transferred back to RAM. As you can see, when using hibernation you don’t have to worry about battery drain, which is better suited for laptops.