home › Data recovery › Http 192.168 0.254 page does not open. If you can’t log into your router’s personal account

Http 192.168 0.254 page does not open. If you can’t log into your router’s personal account

192.168.0.1 - the address for entering the router to which the device is connected via a local or wireless network. The login address differs between manufacturers and models. 192.168.0.1 is relevant for most routers from the following companies: TP-Link; D-Link; Asus; Zyxe; Tenda; Huawei; Cisco; Qtech; NetGear; ZTE and others. The address and login access, often admin - admin, of the router used is indicated on a sticker on the back of the modem and in the operating instructions. In the article we will look at the entrance to Personal Area and fixing connection errors.

Connecting the router via 192.168.0.1 to a computer, laptop or wireless device

If the router is already connected to the computer and was working or is working, skip this step and go to the next step. For owners of a new router or one that has been reset to factory settings, we’ll start from the moment the device is taken out of the box (how else did you know that you need to log in using 192.168.0.1). Let’s decide how we want to log into the router, via a local connection via wire or via Wi-Fi.

Log into the router via a local network wire

Login to your router’s personal account via Wi-Fi

Access to the router control panel login page is possible on devices with a Wi-Fi receiver: phone; tablet; and on Android OS, Windows Phone or IOS. The main thing is that the router can distribute Wi-Fi.

We connect the router to the outlet and turn it on with the “On” button;
if you need to activate the button for transmission via Wi-Fi, press it;
on the back of the modem we look at the network key, often indicated by SSID, and the wireless network password;
in the device being logged in, connect to WiFi networks router and enter the specified password;
open the browser and enter 192.168.0.1 in the address bar
The router’s personal account will load, enter your access data (admin - admin).

Ideally, go to the router settings page. 99% that readers of this article have encountered a problem that prevents them from accessing their personal account. Let's figure it out.

192.168.0.1 - can’t log in, page is not available in the browser

Let's check the parameters before doing complex things and hope that the error crept in due to inattention:

Make sure that the computer is connected with a LAN cable to the router. Checked on the icon:

if there is no connection, try turning on the router through a different port. On mobile devices oh, it’s easier, if WiFi is connected, then there is a connection to the modem;

Look carefully where the IP address is entered. You need to enter it into the address bar of your browser (point 1 in the first picture of the article);

Check the address again, 192.168.0.1 - one hundred ninety-two dot one hundred sixty-eight dot zero dot one. Not a comma, not a dash, not an "O". Error options: “192 168 0 1”, “192, 168, 0, 1”; "192, 168, o, 1", "192.168.o.1";
log in from another browser;
clear the cache of the browser you are logging in from:
*insert reset table*
try disabling it temporarily Windows firewall;
when using a firewall or antivirus, temporarily deactivate programs, for example: Nod32, Kaspersky, Avast;
reboot the device and router;
go to the router settings at 192.168.0.1 from another device;
when connecting to the router with a Lan cable, change the LAN port on the router;
make sure that the cable is installed in the Lan port, and not in the Ethernet, where the Internet comes from.
check that the browser is not using a proxy server. To do this, go to the Windows Control Panel and go to Internet Options. If the proxy is active, disable it and try again.

If nothing helps and no problems are found after checking, then we will find the problem in another way.

Checking router availability via IP 192.168.0.1

Opening command line and execute the command

ping 192.168.0.1

If the answer is “the timeout interval for the request has been exceeded” or “the node could not be found,” then we try to change the Lan connection port on the router, but if the router pings and there are no errors,

Then we move on to setting up the network connection.

Network settings for accessing IP 192.168.0.1

We go to network connections through the control panel, command line or through the taskbar context menu.

Select the item “change adapter settings” if you logged in with Windows 10; in Windows xp, 7, Vista, 8 the item is called “adapter settings settings”.

In the window that opens, look for our network connection, right-click on it and go to properties.

Double-click on IP version 4 TCP IPv4. Modern routers and providers do not require you to strictly specify connection data; if the numbers in the menu are filled in, try switching to “obtain IP addresses automatically” and “obtain DNS servers automatically.” If the option is already selected, enter the addresses manually.

To do this, change the option to “use the following IP address” and “use the following DNS server addresses.” We write the following:

IP address - 192.168.0.3
mask - 255.255.255.0
Gateway - 192.168.0.1
DNS - 192.168.0.1

Check access to the control panel; if this does not help, then there are two options left.

Hard-reset resets the router settings to factory settings. Information, including provider and internal Wi-Fi passwords, will be lost. Repeat the recommendations described above;
Call a technician or take the router to a service center for diagnostics.

The instructions are suitable for routers:

Routers TP-Link: TL-WR702N; TL-WR720N; TL-WR740N; TL-WR741ND; TL-WR743ND; TL-WR841N; TL-WR841ND; TL-WR842ND; TL-WR843ND; TL-WR940N; TL-WR941ND; TL-WR1043ND; Archer C10; Archer C50; Archer C20.
Asus routers: RT N10; RT N10p; RT N12.
D-Link WiFi routers: DIR-100 (F|FE); DIR-120; DIR-130; DIR-140L; DIR-300; DIR-300A (C1 | D1 | C1 | NRU); DIR-320; DIR-320A (D1 | NRU); DIR-330; DIR-400; DIR-412; DIR-450; DIR-451; DIR-456; DIR-456 C1; DIR-457; DIR-457U; DIR-506L; DIR-615 (FB O1 | K2 | K1 | M1); DIR-620 (D F1 | S G1; DIR-628; DIR-632; DIR-635; DIR-636L; DIR-640L; DIR-645; DIR-651; DIR-655; DIR-685; DIR-806A; DIR-815 (A C1A); DIR-825 (A D1A).
ADSL modems D-Link: DSL-300 (T); DSL-302(G|T); DSL-306; DSL-310; DSL-360 (I; T); DSL-500 (G|T); DSL-502(G|T); DSL-504(G|T); DSL-506; DSL-510; DSL-514; DSL-520T; DSL-524T; DSL-560I; DSL-562T; DSL-564T; DSL-584T; DSL-604 (+G | G); DSL-700; DSL-1510G; DSL-2300U; DSL-2500U (BRU | C | D | DB); DSL-2520U (BRU | C | D | D8);DSL-2540U (BRU | C | C2 | C3B | CB | D | DB);DSL-2600U (BRU | C | C2); DSL-2640U (BRU); DSL-2650U; DSL-2740U (BRU); DSL-2750U; DSL-2760U (BRU|C|D); DSL-6540U; DSL-6641i; DSL-6740U; DSL-7850; DSL-G604T; DSL-G804V.
Tenda routers: n3; n300; n304; w268r; n304; n630; w308r; w309r; w316r; w368r; w311m; w522u.

class="eliadunit">

Among the many budget routers, the TL-MR3420 TP-LINK stands out for its use of a dual-antenna circuit and the ability to connect a GSM or CDMA modem as a backup Internet channel. Among other features, it is worth mentioning bandwidth management, protection against external attacks, network diagnostics, and support for the function secure connection Wi-Fi Protected Setup, which TP-LINK calls QSS.

In this article we will configure the router for its intended purpose, that is, distributing the Internet via LAN and Wi-Fi via a 3G connection.

Connection 3g router to computer and its settings

1. Make the necessary settings on your computer’s network card.

For Windows XP: Start - Control Panel - Network Connections - Connection via local network- Properties - Internet Protocol (TCP/IP)- Properties - Get IP automatically And Obtain DNS server address automatically.

For Windows 7: Start - type View network connections-Local Area Connection - Properties - Internet Protocol version 4 (TCP/IPv4) and Properties - Obtain IP automatically and Obtain DNS server address automatically.

2. Connect an Ethernet cable between the computer’s network card and one of the router’s ports A(for example, to port No. 1 in the figure).

check that you received the IP address automatically from the router:

For tl-mr3420, 3220

For tl-mr3020

Make sure the mode switch on the device itself is in the 3g position

3. Open a browser window and in the address bar enter:

For tl-mr3420, 3220 - 192.168.1.1 login and password to log in admin/admin
For tl-mt3020 - 192.168.0.254 Also admin/admin , and click Login.

After clicking the Login button, the settings page will open. Once logged in, change your password, " System" And " Admin Password".

PS... Now you can Russify the web interface, for this you will need winSCP. To access, use the router address (192.168.1.1), login (root) and password that you specified to access the router.

Unpack the russian archive and copy it to the router using winSCP

Setting up a 3G modem

1. First, we need to specify the type of network access.

Go to the tab Network - Internet Access
Select mode 3g only(3g preferred is also possible).

Save- Save

2. Insert the 3g modem into the usb connector of the router.
Go to the Status tab, make sure that the modem is successfully recognized by the router:

3. If the modem is detected, then go to the tab Network - 3G
In Region (Location) select Russia(Russian Federation)
In field Mobile ISP select your provider.

Save.

My modem (huaway e367) for beeline started up with the following settings:

4. To check connection status go to the menu "Status"

If the connection is successful, you should see something like this in Status:

Setting up a wireless router network

1. Open the browser and write in the address bar http://192.168.1.1/
2. To access WEB interface devices will ask you for a default login and password admin/admin
3. Go to the section QSS(QSS function) and turn it off by pressingDisable(Disable)

4. Go to the WEB interface of the device and go to the menu " Wireless"(Wireless mode) and select the submenu there" Wireless settings" (Wireless Settings)

Wireless Network Name(Network name) - The name of your network
Channel(channel) - it’s better to manually select the freest one
Region(Region) - Russia

After settings - save - Save(Save)

5. Go to the submenu " Wireless Security" (Wireless Security)

Select WPA-PSK/WPA2-PSK
In field PSK Passwordenter the password for your wireless network (at least 8 characters, English letters/numbers)

Save - Save.
After this, reboot your router through the "System tools" -> "Reboot" section

If after this you have a problem connecting mobile devices, then do the following
- Disable the QSS function in the QSS tab
- Change the values of two parameters RTS Threshold And Fragmentation Threshold in the bookmarkWireless > Wireless Advanced(Wireless mode - Additional settings wireless mode)
RTS Threshold - 2305
Fragmentation Threshold - 2304

We will configure your Wi-Fi card on your computer to access the network

To do this, left-click once on the network card icon in the lower right corner of the screen (next to the clock). In the window that appears, click the Connect button and enter the Access Key in wireless network, which you asked in the previous paragraph.

Etc are unanimously accepted standards worldwide for router IPs. It is also called "Default Gateway IP" in literature.

Router Login Procedure

If you are here, it means you may be looking for a way to log into your router admin panel. Just type into your browser address bar: 192.168.0.254 (if it"s not working). Next, enter the username & password of your modem. If you don"t remember it then.

List of Possible Username & Password

After extensive analysis, we have come to the conclusion that these below presented router manufacturers are using 192.168.0.254 as router login IP. There is a big chance your router company too, is listed among them. Just click the company name to view router models, router setup & configuration manuals and more.

List of Router Admin Panel IPs

You tried to log into your router using 192.168.0.254 but an error occurs then it means you are using a wrong IP. In this case, it is recommended to see other probable IPs your router company occasionally uses. Just select your company below to find yours!

Select Your Router Company 100Fio Networks 1net1 2wire 3BB 3Com 3M 3WARE 8level A-Link Above Cable ACCELERATED NETWORKS ACCONET Accton ACEEX Acer ACorp Actiontec Adaptec ADB ADC KENTROX ADDON ADIC Adtran ADVANTEK NETWORKS Aethra AGK Nordic AirLAN Airlink 101 AirLive Airnet AirRouter AirTies ALAXALA Alcatel Alcatel Lucent Alfex Alice ALLIED Allied Data Allied-Telesis AllNet Alpha Alphion ALTEON Alvarion AM Telecom Ambit AMITECH Amped Wireless ANDOVER CONTROLS Ansel AOC Aolynk AOpen AP Router APC Apple Arcadyan Arcor ARECA ARESCOM Arris ARTEM Articonet Artnet Asante ASCEND ASCOM ASMACK Asmax ASPECT ASUS ATEL Ativa Atlantis Land AT&T AudioCodes Aus .Linx AVAYA AVM AWB Networks Axesstel AXIS AXUS AZiO Aztech Bandluxe Bandridge Batelco Thomson Baudtec Bausch BAUSCH DATACOM BAY NETWORKS Baytec Beam bebo BEC Technologies Beeline Beetel Belgacom Belkin Bell Benq Best Data BeWAN Billion Binatone Bintec Elmeg BlackBox Blanc Blitzz BLUE COAT SYSTEMS Blue Thunder BMC SOFTWARE Bountiful WiFi bRoad Lanner BROADLOGIC Broadnext BROCADE BROTHER BSkyB BSNL BT Bticino Buffalo C3-TECH Cabac Cable & Wireless CABLETRON Calix Cambridge (CIG) Cameo Canyon Caremo CastleNet Cayman CBN CD-R King CELERITY CELLIT Cerberus Adsl CHECKPOINT ChinaMobile CIPHERTRUST Cisco Clear CNET COM3 Comcast Compal Compaq Compex CompUSA Comstar Comtrend Conceptronic Conexant Corecess Coredy Corega Cozy Cradlepoint Creative Crypto CT Systems CTC Union CTSystems CYBERGUARD Cyberoam Cybersafe CYCLADES D-Link DALLAS SEMICONDUCTORS Dana DareGlobal Dasan Data Connect DATACOM DATAWIZARD.NET Davolink DAVOX DD-WRT DEERFIELD Dell DEMARC DEUTSCHE TELEKOM DEVEL CON Dick Smith Elec DICTAPHONE Digicom Digiconnect DIGICORP DIGISOL Digitus DirecWay Dovado Draytek DS-Link Dynalink Dynex E-CON E-TEC EarthLink Easy Touch ECHOLIFE ECI Ecom EDIMAX EE EFFICIENT NETWORKS eHome Eicon Networks Elcon ELSA Eltel Eltex Eminent Encore Energy Imports EnGenius Enkom ENTERASYS ENTRUST Ericsson ESP Eusso Everest EVERFOCUS EXABYTE EXTREME NETWORKS F5-NETWORKS FiberHome Fiberline Flextronics FLOWPOINT Flying Voice Fortinet FOUNDRY NETWORKS FPT Telecom Franklin Wireless FREETECH FreeWiFiLink FRITZ FRITZ BOX Frys FUNK SOFTWARE Gateway Geek ADSL Geewan Gembird Gemtek Generic Genexis Gennet OxyGEN GERICOM GetNet Gezz GIGA Gigabyte Gi gafast GMesh Gnet Goldweb Grandstream Gravis Plus Great Speed Green Packet Greyfox GVC Hama Ham Hamlet Hatari Hawking Hewlett Packard Hitron Hitron Homeline Hotbox Hotbrick Hotline HP Huawei Humax Iball Iblitzz Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm Ibm CIDU ICOTERA IHOI INET IMAI InCA Inchon Infomark Infosmart Innoband Innotech INTEGRAL Technologies Intel INTEL/ Shiva Intelbras Intellinet Inteno INTERBASE Intercross INTERMEC INTERSHOP INTERSYSTEMS Intertex INTEX Intracom Inventel IOGear ION IPSTAR IRONPORT Iskon Iskratel ITI Jaht JD EDWARDS JDS MICROPROCESSING Jensen Scandinavia Jio Juniper Justec Kaiomy KALATEL Kasda Kcorp KEEBOX Keyteck Kingnet KingType Kobian KO NICA MINOLTA KONIG Kozumi KPN Kraun KTI Kyocera L7 Networks La Fonera LANCOM Systems LanTech LANTRONIX LATIS NETWORK LB-Link Lectron Legrand LevelOne Leviton LG Libyamax Linetec Link-Max LinkPro LinksKey Linksys LIVINGSTON LOCKDOWN NETWORKS LOGITECH LogN Longshine Loopcomm LUCENT Lucent Technologies Luxul MacSense Mada Maplin Marconi MAXDATA MaxGate Maxim Networking MCDATA Mecer MediaLink MEDIATRIX 2102 Medion MEGASTAR MENTEC Mentor MERCURY MERIDIAN Microcom Microlink Micronet MICROPLEX MICROROUTER Microsoft MikroTik MILAN Minitar MINOLTA QMS MINTEL MITEL Mitrastar Mobily Modecom MoFi Monoprice Motorola Mototech MRO SOFTWARE MS-Tech MSI MTN MTN Hynet Multilaser Multitech MUTARE SOFTWARE MyMax MyTech NAI NEC Net-Lynx NetBox Blue Netcomm Netcoretek Netgate NETG EAR NETGENESIS Netis NetMaster Netopia NETPORT NETSCREEN NETSTAR Netvigator NETWORK APPLIANCE Network Everywhere Neufbox New Link Nexian Nexland Nexxt Solutions NGSEC NIKSUN NIMBLE Noganet Nokia NORTEL NovaTech Novatel Wireless Nucom NULLSOFT O2 Octtel OKI Olitec OLITEC (TRENDCHIP) OMNITRONIX OMRON On Networks ONIXON Ooma Open Networks OPENCONNECT OPENWAVE OPNsense Opticom Option ORACLE ORANGE Orcon Origo OSICOM OTE Ovislink Ozenda Pace PACIFIC MICRO DATA PANASONIC Paradigm Paradyne ParkerVision Pass and Seymour PCI pcWRT Peak Pegasus PENRIL DATABILITY Pentagram PENTAOFFICE PENTASAFE Peplink Pepwave PERLE Pheenet Philips Phoebe PHOENIX Pikatel Ping Communication Pirelli Planet Planex PLDT Pluscom Plusnet POLYCOM Portal PowerNet PRESTIGIO Primatel Primus Primus Lingo Pro-Nets Prolink Promsvyaz Pronet Pronets PROXIM PSION TEKLOGIX PTCL PYRAMID COMPUTER Q-Tec Qualcomm Quanta Qubs Quick Eagle Networks Quicktel QUINTUM TECHNOLOGIES INC. Qwest RadioLabs RADWARE RAIDZONE Ramp Networks Ramptel RCA ReadyNet RealTek REDHAT Reliance Repotec RESEARCH Retail Plus RICOH Riger Corporation RM ROAMABOUT Rogers Rosewill Ruckus Sabrent Safecom Sagem Sagemcom Samsung SBS Schimid Schmid Scientific Atlanta Securifi SENAO Seow

This article will tell you how to correctly enter 192.168.0.1 into the modem (router) settings.

To do this, enter 192.168.0.1 into the browser line and press enter.

If you are not logged in, you must first determine probable reasons Problems. If the network router is configured for this address, then the computer must have an address distinguished by the last digit, that is 192.168.0.(2-254) . Otherwise, if the last digits match, a conflict will occur with the network equipment. How do you still go to 192.168.0.1?

Possible reasons for the lack of connection to the router via 192.168.0.1

First of all, you should find out the settings of the network card. This can be done in several ways. Below will be discussed two essential for Windows 7/8-8.1:

The enabled state needs to be checked. To do this, right-click on the one where the connection was made, select “ State" and further - " Intelligence" In the window that opens, look at the address PC and router IP address.

As mentioned above, the computer's IP address must differ in the last digit from the IP address of the network equipment gateway. Compound IPgateway installed automatically and preferred DNS — 192.168.0.1 , Subnet mask — 255.255.255.0 , IP address 192.168.0.(2-254). For example: 192.168.0.2.
If any numbers do not correspond to the required ones, they can be set manually. Right-click on the network connection, then “ Properties» => « Internet Protocol Version 4", check the box " Use the following IP address» and set the required settings.

192.168.0.1 login to your personal account

In most cases, popular manufacturers of routers and routers set the default login and password in the admin panel of your personal account admin admin. If you have changed your login information and forgotten it, you can reset the modem to factory settings by pressing the " Reset" Please keep in mind that other settings will also be reset, so you will need to clone Mas- address and set other details for connecting to the provider.

192.168.0.1 and 192.168.1.1 admin admin

Such common modems and Wi-Fi routers as: TP-Link, Zyxel, Qtech, Asus, NetGear, Huawei, ZTE, D-Link Often the input settings are set to both 192.168.0.1 and 192.168.1.1. You can read the instructions in another article at this link.

Among the variety of network equipment, the IP address 192.168.8.254 is rarely used and, as a rule, on VoIP gateways such as D-Link DVG-5004S, DVG-6004S. If we consider wireless routers and modems, a striking example would be the D-Link DVG-N5402SP WiFi router and its gigabit “brother” - DVG-N5402GF. These devices use the 192.168.8.0/24 subnet for the local network, with a gateway in the form of the router itself with the address 192.168.8.254. Setting up the router and setting a password is done through the device’s web interface, accessible through this IP.
To do this, you need to launch any web browser - Chrome, Opera, Firefox, Edge or Internet Explorer. Then, in the address bar, enter the following address: 182.168.8.254 .

There is no need to add “http://” or “www.” before the address. Simply enter the IP and press the Enter key.
Next, if everything is configured correctly, an authorization window should appear in which you must enter the router’s login and password.

Why doesn't the site 192.168.8.254 open?

If, when trying to enter the settings of a Wi-Fi router or VoIP gateway, you are faced with the fact that the router’s website at 192.168.8.254 is inaccessible and does not open, then most often the reason for this is incorrect settings of the computer’s network card. To check this, you need to open the list of network connections. In Windows 10, you need to right-click on the “Start” button to do this. In the menu that appears, click on the “Network connections” item:

In Windows 7, 8 or 8.1, to do this you need to press the Win+R key combination on your keyboard and enter the command ncpa.cpl in the “Run” line and click the “OK” button.

In the list of connections, you need to find the one through which the router is connected to the PC. Right-click on it and select the “Properties” menu item.

Now double-click with the left mouse button on the line IP version 4 (TCP/IPv4) so that the following window appears:

Usually, in order to log in to 192.168.8.254 without problems, it is enough to check the boxes to automatically obtain IP addresses and DNS servers.

If you still cannot enter the router settings, then most likely there is some problem with DHCP and you can try to register the addresses manually. To do this, check the “Use the following addresses” checkbox.

Then enter these values:

IP Address: 192.168.8.10 Mask: 255.255.255.0 Default Gateway: 192.168.8.254 Preferred DNS: 192.168.8.254

Click OK to apply the settings and try again to go into the Wi-Fi router settings. If after this nothing works, then in this case it is strongly recommended to try connecting to the router from another computer or laptop. This will eliminate possible problems with your PC.

If the input to 192.168.8.254 is not available from another device, then it makes sense to try resetting its settings using the “Reset” button located on the back of the VoIP gateway body.

The button must be pressed with a paper clip or toothpick while the device is turned on and held down for 5-10 seconds, then released.
With this simple action, you will completely reset the current settings of your network device to the state in which it left the factory.
Thanks to resetting the settings, it is very often possible to eliminate malfunctions in the operation of a router or modem that arose during its operation.

Popular in the category: