192.168 1.1 login to your personal account from an iPhone. Routers and switches. Check what IP the device receives from the router

192.168.0.1 is the IP address of a large number of router and modem models. You probably saw this address on the router itself, in the setup instructions, or somewhere on the Internet. And most likely you know that 192.168.0.1 is used to enter the settings of a router or modem. That's right. Now we will figure out how to log into the router at 192.168.0.1, where to enter it, and what admin and admin are. Our main goal is to go to the page with the router settings.

Let me tell you how it all works. You will understand the diagram, and it will be easier to understand. And then, I’ll show you with an example what you need to do and how to open the page with the router settings. The network device itself (router, modem) runs on its own small operating system. These are independent devices. Therefore, there are no drivers for the router. To configure the router, you need to go to its control panel. The control panel itself is called differently: web interface, router page, personal account, site with router settings, etc.

Depending on the manufacturer and model, the network device has factory settings (which are installed by default). These include the address for logging into the control panel, the factory login and password. Let's take a closer look:

• Router (modem) address. Most often, this is an IP address (from numbers): 192.168.0.1 , or 192.168.1.1 . It may also be possible to use not an IP address, but a hostname (an address made up of letters). For example: tplinkwifi.net, wifi.com, my.keenetic.net, etc. Even if the router has an address made up of letters, you can still access the settings by IP address. The address itself is almost always indicated on the device. Typically on a sticker on the bottom of the device. Also, factory information can be indicated in the instructions or on the box.
• admin And admin. The router control panel itself is protected by a login and password. To enter the settings, after going to the address 192.168.0.1 (in our case), you need to specify your login and password. Again, depending on the specific device model, the factory login and password may differ. Most often, the word admin is used as the login and password (by default). This information is also indicated on the device itself. There are models, for example ZyXEL, where there is no login and password from the factory. It must be installed immediately after entering the settings.

Therefore, first of all, you need to look at what address, and what factory login and password is used to access the control panel of your specific network device. As I wrote above, in most cases, all this factory information is indicated on the device itself. It looks something like this:

Knowing this information, we can open the router settings page.

Login to the router via 192.168.0.1. Login and password – admin

Please note that the device from which you want to log into the router settings at 192.168.0.1 must be connected to the router itself. Via network cable, or Wi-Fi networks. It doesn't have to be a computer. You can access the settings from your smartphone, tablet, and other devices.

To access the settings page, you need to use any browser. It could be Opera, Chrome, Mozilla Firefox, Internet Explorer, Microsoft Edge (in Windows 10), or some other browser, including mobile device. There is one important point here: the IP address 192.168.0.1 must be entered in the address bar, and not in the search bar.

After going to the address, a login and password request will appear. We indicate them. As we already found out above, most often these are admin and admin.

It is important to understand that the page itself, which opens at 192.168.0.1, may look different. Everything depends on the specific device. I showed it using a TP-Link router as an example. But the scheme is always the same: open the browser, go to the address, enter your username and password, and confirm the login.

• TP-Link –
• ASUS –
• D-Link –
• ASUS –

Below we will look at several solutions that will be useful to you if you are unable to access the settings of your router or modem.

Can't access 192.168.0.1. What to do?

I wrote many solutions on this topic in a separate article:. Here we will look at the main and most common problems and solutions.

To start:

We check the IP settings if it does not go into the router settings

We need to open the properties of the connection through which we are connected to the router. To do this, go to the "Network and Sharing Center" and go to "Change adapter settings."

If the connection is via Wi-Fi, then right-click on “Wireless Network” (Wireless network connection). If the connection is via cable, then click on “Ethernet” (Connection via local network) . Select "Properties".

After restarting the computer, we try to go to the address 192.168.0.1. If it doesn’t help, you can try to enter the addresses manually. Like that:

After the reboot, we try again to gain access to the router settings. If this does not help, then most likely you will have to reset the router settings. More about this below.

admin and admin at 192.168.0.1 are not suitable

It is not uncommon for a situation to occur when the authorization page still opens, but after entering the admin username and password, nothing happens. The page simply reloads, or a message appears that the password is incorrect.

First, look at the router case to see what password and login are used by default in your case. If it’s admin and admin, then most likely the password (and/or login) was changed in the router settings. Therefore, if you don’t remember it, then most likely you will have to reset the router settings and configure it again. If this is not a hardware problem, and after resetting the settings, you will be able to go to the control panel.

Important! It is quite possible that after resetting the settings, the Internet through the router will stop working (if it worked before). And I cannot guarantee that this will solve the problem with logging into the router settings. If you still manage to access 192.168.0.1, then you can configure your router again.

Resetting the settings is not difficult. Just find the Reset button on the router, press it, and hold it for about 10-15 seconds. As a rule, this button is recessed into the body, so it needs to be pressed with something sharp.

After resetting the settings, to access the control panel you need to use the factory address, username and password, which are indicated on the device itself or in the instructions.

I think you were able to log into the router at 192.168.0.1. If nothing worked and you tried all the solutions I wrote about above, then describe your case in the comments. Don't forget, this could be a hardware failure of the router. Pay attention to the operation of the indicators. And try to remember when the problems started.

Prerequisites

Some people simply enter the IP address in the search bar of their browser that is convenient for them, often these are the numbers 192.168.1.1 or, for example, and eventually end up on a site where many types of routers and their settings are displayed, so users search for their router according to the instructions , supplied with it in the packaging by the manufacturer, as in other devices.

Let's say that you recently purchased a router or, for example, want to change some things during its operation, you, of course, need to get to the page for changing the parameters of your modem. In other articles ( , , , , ) there are already some instructions on how to do this for certain types of devices, and there is also a useful one using a browser.

192.168.1.1 and 192.168.0.1 - what are these addresses and how to use them?

A router is a rather complex mechanism that has its own unique operating system and programs for its implementation, so it is not surprising that it also has many different parameters for proper functioning, which can be opened using almost any user-friendly browser. Read the general instructions from scratch or after resetting the settings. So, based on the request you enter, a specific page appears where you can specify all the necessary and appropriate settings so that the device functions correctly. If you enter incorrect settings, serious problems with the operation of the modem may occur that will not allow you to successfully access the Internet and perform any actions with the network, but we hope this article will help you configure everything correctly and avoid any problems with your router and use it as long and efficiently as possible, taking full advantage of all its capabilities, which in fact are far from few.

So, usually on all modems you can get to the settings menu to change them using the addresses 192.168.1.1 and 192.168.0.1 or special pages with specific addresses offered by the router manufacturer. These pages, of course, are safe and verified; they do not and cannot contain viruses, so your computer will certainly be protected from a possible virus attack. Detailed information You can find out about these sites below; in the article, everything about this will be indicated and described as clearly and in detail as possible.

Changeable parameters are also often used, installed on the computer using laser or optical discs, but in most cases it is more convenient for the user to do everything through the browser, as this saves quite a lot of your precious time.

How to find out the router's IP address?

The first step towards a correct and high-quality connection of the router for its uninterrupted service to you for a long time will be its IP address. In fact, it is extremely easy to recognize it, since on almost all devices the address, password and login (username) are indicated at the bottom of the router; you just have to look down, turning the modem upside down. Usually you can see a sticker there that contains all the information you need, or most of it, indicating the source for more detailed instructions.

As an example, let's take devices like Tp-Link. The IP address you will need is - http://192.168.1.1 (There are models with a different address - http://192.168.0. 1). Login and password are admin and admin respectively.

Another example is on a D-Link modem:

On a ZyXEL type device, it is not the IP, but the website address - http://my.keenetic.net. But also, as before, the settings can be opened using the address 192.168.1.1, which was already mentioned above.

All this necessary information is on any modem or in the instructions for it, which are necessarily included with each device by the manufacturer.

Open the router settings page through the browser

• First, connect your computer to the modem itself, either using a cable or via wireless Wi-fi. It's even easier to do this using a LAN cable. One end needs to be inserted into the network connector of the computer, and the other into the LAN connector on the modem.

If you want to connect via Wi-Fi, especially if the router is new, this is easy to do - connect to your own network, which, most likely, will not have a password. If there is a password, then a suitable password will most likely be written on the modem case. When you just connected the router, the connection may be unavailable or have some restrictions. This is acceptable since the device is not configured, so move on to step two.

• A browser convenient for you opens (these can be a variety of browsers - Opera, Chrome, Internet Explorer and many others. The main thing is that you get used to it and feel comfortable working in it) and enter the IP address of your modem in the search bar. This will most likely be the addresses http://192.168.0.1 or http://192.168.1.1 ( you don't need to use http://). We go to the site by clicking the Enter key or search.

Another example - let's try to get to the address 192.168.1.1 (manufacturer - Asus):

• The next step is that the site will ask you to enter your username and password. Usually these are admin and admin respectively. To clarify, you can also look at this information on the modem case, where all the information you need about setting up the device for its correct and error-free operation is written.

The windows for entering the username and password, as well as the settings window itself, may differ slightly in interface depending on the model and manufacturer of your router, but their essence will be the same. I think it won’t be too difficult for you, the reader, to understand the interface.

If everything is done successfully, you can now change the settings of your device.

Some models of ADSL modems and routers D-Link and TP-Link use an IP address on the local network 192.168.1.1 . A striking example would be the DSL-2640U modem or the TL-WR841ND Wi-Fi router.
In principle, this is normal and there is nothing terrible about it - it’s just using a different subnet and that’s all. It is used on devices from ASUS, Zyxel, NetGear. Accordingly, to enter the router settings you need to enter the address in the browser http://192.168.1.1 and then we make the necessary changes to the configuration parameters of the network device.

But not everything always goes smoothly, as we would like, and various troubles can always arise unexpectedly. Let's look at cases when you need to change some settings of the router, but when you try to log in to the web interface at 192.168.1.1 does not open authorization window for further entering your login and password. It is useless to contact the technical support of your Internet provider, since this is not their problem and they are not obliged to solve it! What to do and how to solve this problem further? You can call a paid specialist who will figure it out and fix everything. Or you can do it yourself and not spend money. To do this you need to do the following:

We want to go to 192.168.1.1 - the page is unavailable

You entered the IP address of the router in your web browser, it thought for a long, long time and eventually gave the error “Cannot access the site.”

You need to start diagnosing by checking what IP address the computer’s network adapter has. To do this you need to open network connections. In Windows 10, you need to open System Settings and select the section Network and Internet:

In the window that opens, you need to select a section Ethernet and click on the link “Configure adapter settings”:

This way we get to “Network Connections” in Windows:

Find your Local Area Connection here and right-click on it to open the context menu. Select an item State. In the window that appears, click the "Information" button to display information about the status of the network connection:

Here you need to pay attention to the line Default Gateway. If the router address is 192.168.1.1, then it must also be registered as a gateway. Accordingly, in the IPv4 Address line, the IP from the router’s subnet must be entered, that is, from the range 192.168.1.2-254. When the router uses a different address for the local LAN network, for example, 192.168.100.1 or , you will immediately see it! If there is a completely empty line or an IP from the 169.254.X.X subnet, this means that in automatic mode the computer cannot receive an address from the router and you must try to do this manually.

Again we return to Network connections, right-click on the Ethernet connection and select the menu item Properties.

In the window that opens, double-click with the left mouse button to go into the properties of the IP protocol version 4. Most often, by default, obtaining an address should be in automatic mode:

This is normal and should work this way in most cases. If it doesn’t work, this means that either the DHCP server is disabled on the router, or operating system Windows problem with a DHCP client. In this situation, you can get out of the situation by manually setting up the network parameters. To do this, check the box Use the following IP address and specify the values ​​manually:

To avoid conflict on the network, it is best to take away from the beginning and end of the range. For example:
IP address - 192.168.1.55
mask - 255.255.255.0
gateway - 192.168.1.1
It is also better to specify the DNS server manually.
Usually a modem or router also plays this role. After this, you need to try again to log in to the device’s web interface. Usually this is where it ends in most cases.

Active proxy settings prevent you from accessing 192.168.1.1

The second most popular reason why a D-Link or TP-Link router does not open via 192.168.1.1 is the proxy settings specified in the browser settings. This can be done either accidentally or on purpose, for example, due to the fact that Internet access on the local network is organized according to exactly this scheme or, for example, some kind of virus has worked. It's easy to check and fix. Opening Windows Settings > Network & Internet:

Go to the Proxy subsection and check that the “Use proxy server” switch is in the “Off” position.

Login to 192.168.1.1 does not work due to driver problem

If you have just reinstalled the Windows operating system and after that there is no Internet and the router is inaccessible via http://192.168.1.1, then 99 out of 100 reasons are that the serial adapter driver is not installed. You can check this by opening Device Manager. If there is a device with an exclamation mark and signature Network Controller:

Alternatively, maybe Ethernet controller:

In the English version of Windows OS it will be called Network Controller. This confirms that the network card drivers are indeed not installed. What to do? First find the correct driver version. But to do this, most likely you will have to go to your friends, go online from them and download the required version to a flash drive. Then connect it to your computer and feed it the latest network card driver:

Site 192.168.1.1 is unavailable due to problems with the router

Unfortunately, there are also cases when the network access devices themselves - modems, Wi-Fi routers and optical terminals - break down. Sometimes this happens due to thunderstorms, power surges, or simply old age. In this case, the device simply stops responding to requests over the network and does not distribute the Internet - neither via cable nor via WiFi. Of course, login via 192.168.1.1 is not available. In some cases, resetting the router to factory settings using the button can restore the router to working properly. Reset. It is located on the back of the case and is made in the form of a small hole.

You need to press the Reset button using a paper clip, match or ballpoint pen. In order for the device to reset the settings, you need to hold the button pressed for several seconds - usually from 5 to 10. After this, the status indicators should blink and go out and the device will restart.

There is no login to the web interface because the network cable is damaged

We must not forget that access to the router settings may be unavailable due to a damaged network patch cord. Be sure to check it carefully along its entire length to see if there is any damage to the braid or cores, whether it is crushed or bent somewhere.

It is also worth paying special attention to the connectors. Very often, one of the wires breaks right in the connector. At best, this will lead to problems with the network connection, and at worst, the device will be unavailable.
If you have another patch cord in stock, try connecting your computer or laptop to the router using it for a test. Then you will immediately see whether there is a problem with the cable or not!

192.168.1.1 login admin does not open and password does not work

Now let's look at another option for the development of the event. You have access to the web interface of your modem or router via http://192.168.1.1, but the login and password admin admin are not suitable and login is not available. The browser writes that the password is incorrect and prompts you to log in again! What to do?

Let's start by checking whether the default username and password admin are actually used on your router. However, there are exceptions for different brands and models. To do this, you need to turn the device upside down and look at what is written on its sticker:

Usually the IP address is indicated there, as well as the authorization data used initially - Username (login) and Password (password). As you can see in the picture, our D-Link modem uses IP 192.168.1.1 admin admin. In some older DLink models, an empty string is used by default instead of a password, then the "Password" field will be written Leave the field blank(leave the field blank).

But even if the sticker says that Login login and password 192.168.1.1 admin/admin, it’s not at all a fact that you will be able to get under them. The fact is that if someone had already set up this network device before you, then he could well have changed the password to something else. This happens very often. What to do in this case? Yes, just reset via the Reset button to factory settings. Otherwise, just look for the person who configured the device before and ask him for the access key!

Note- if you are sure that no one has changed the password or you have reset the router settings, but the router is still inaccessible via 192.168.1.1 and complains about the password - try logging into it using another browser - Chrome, Opera or FireFox. Sometimes the browser remembers incorrect data and inserts it into the fields by default when logging in. You can eliminate this either by clearing the cache or by using a different Internet browser.

I want to immediately and unequivocally state that in networks and network technologies the IP address 192.168.l.l does not exist in principle, which means that we can’t access a router using it - it won’t work! Where did it come from then and for some reason many users try to log into a TP-Link, ASUS or Zyxel router through this incorrect address 192.168.l.l?! Let's figure it out!!!

Most WiFi routers, ADSL modems and optical routers use IP 192.168.1.1 for the local network by default. As you can see, it is completely digital and consists of 4 digital groups. Letters are not used there.
The same address is usually written on a special sticker located on the device’s body so that the person who picks it up for the first time can easily access its web interface and make the necessary settings.

As you can see, the numbers are clearly printed on the sticker and it is completely unclear how and how you can see 192.168.l.l to log into the router instead of the purely digital address of the device - 192.168.1.1.
But we are all different people and we all have different perceptions, and therefore we should not be surprised at anything - anything can happen. Let's look at the most common cases.

How to access http://192.168.l.l

In order to log in via 192.168.l.l to the router using the admin login and password, you must first launch a web browser: Chrome, Opera, Firefox or Microsoft Edge. You must enter the IP of the network device in the address bar. You just don’t need to enter http://192.168.l.l to log into the router, and its IP address. That is - 192.168.1.1 . Like this:

After this, an authorization window on the device should open, in which you need to enter the admin login and password (usually also admin).
If suddenly your Wi-Fi router or modem complains about the wrong password, then try using ours, which contains information about the most popular brands and common models.

Login to 192.168.l.l is unavailable

Even if you entered the router address correctly, that is, 192.168.1.1 instead of the incorrect 192.168.l.l, but the personal account of the TP-Link, ASUS or Zyxel router is still unavailable, then most likely the reason is one of the following operating system settings Windows systems.

1. IP address of the network card

The first and most important reason why a WiFi router may be unavailable is an incorrect IP address. To check this, you need to open the network Windows connections 10 and find the one through which the router is connected to the computer or laptop. Right-click on it:

In the menu that appears, click on the “Properties” item to open the network adapter properties window. In the list of network components, double-click with the left mouse button on the line “IP version 4 (TCP/IPv4)”:

In the protocol parameters window that opens, you must first check the boxes for automatic IP acquisition and check the login to the router. Just not through 192.168.l.l, but through a digital address with ones at the end. If it doesn’t help, then you need to check the “Use the following address” checkbox and enter the following values:

IP address 192.168.1.1 Mask 255.255.255.0 Gateway 192.168.1.1 DNS server 192.168.1.1

I think it’s clear that you still won’t be able to write letters instead of numbers - the system simply won’t allow it. Although in practice I met a person who tried to register IP 192.168.l.2 on his computer. But of course nothing worked out for him!
Click the “OK” button to apply the settings and try again to log into the Personal Account of the network device.

2. Proxy server is used

The second common reason why logging into the personal account of the 192.168.l.l router may be unavailable is active Proxy settings in Windows 10, which prevent the user from logging into local addresses. To fix this, open the Windows 10 settings and go to the “Network and Internet” section:

Here you need to find the “Proxies” subsection in the menu on the left and go into it. Among other options, there will be a “Use a proxy server” slider. It must be moved to the Off position. After this, you need to restart your web browser and check access to personal account modem or router.

3. Login to 192.168.l.l is blocked by antivirus

The third popular reason for the inaccessibility of the router’s web interface is the anti-virus protection of the computer or the packet filter that guards the network connection.

To exclude the possibility that the entrance to 192.168.l.l via admin/admin is blocked by the computer’s security settings, we would strongly recommend that you temporarily suspend the operation of this software for testing.

Are you looking for how to log into your router to configure it? Why can’t I log in and how to properly open the admin settings panel http://192.168.1.1? Some users try to enter the router settings to set Internet and wireless network parameters and end up on the Google or Yandex search results page. Why is this happening?

To access the settings through the admin panel, the router does not need to be connected to the Internet. Setup takes place without the Internet, over a local network, via a laptop, netbook or computer. Many users mistakenly believe that changing parameters occurs on the Internet and incorrectly connect the cable to the device.

To log in correctly, you need to disconnect the Internet cable and connect a regular, short network cord (Ethernet). This cable is familiar to many who have previously connected computers or laptops via a local network using wires. Yes, there was a time before the invention of Wi-Fi technology. Typically, an Ethernet cable comes with any network devices, routers, modems, routers, access points, etc.

You need to connect the router to your laptop or computer and try to go into the settings panel. You only need to use LAN ports for connection (! NOT WAN). When connecting, make sure that all indicators on the front panel are lit or flashing green.

As a last resort, reset the settings using the reset button on the back of the router. If, even after resetting the settings and rebooting, you still cannot log in using admin admin at http://192.168.1.1, watch the following video:

Correct configuration of TCP/IP and DNS addresses for 192.168.1.1.

Go to the properties of the connection used to connect to the router settings. Typically this is a standard network connection, a local area network connection. Open the Network and Sharing Center, go to properties and make sure that the checkbox is in the “Receive automatically” position. The network connection must be active (without a red cross).

If you can’t log in with these standard settings, you can try using manual settings. In the IP field, you need to enter a network address from the same subnet as the router (192.168.1.1). This will be any ip with a value from 192.168.1.2 to 192.168.1.255. For example, you can take the following IP address: 192.168.1.12.

We leave the subnet mask as standard - 255.255.255.0. Gateway address = modem or router address = 192.168.1.1. DNS servers can be set to standard Google ones or any others, it doesn’t matter. Google has it as 8.8.8.8.

After entering new TCP/IP v4 parameters, do not forget to save them by clicking OK. We go back to the browser and try to log in. If this does not help, you can try checking your proxy settings; they should be disabled.

It wouldn't hurt to disable the standard Windows firewall or any other antivirus-based firewalls, such as ESET. Such programs can block any network connections, including those to the settings panel http://192.168.1.1 via admin/admin.

Still having trouble logging in? Carefully read the instructions, user manual of your router, modem, access point or router. If you do not have a paper copy of it, download it online from the manufacturer’s website. Make sure that it is 192.168.1.1 that is used to configure the parameters. These may be other addresses, it all depends on the manufacturer (Tplink, Dlink, Asus, Netgear, Sagemcom, Zyxel, etc.)

Possible options:

• 192.168.0.1
• 192.168.0.50
• 192.168.0.3
• tplinklogin.net
• routerlogin.net
• and other login pages

Manufacturers keep up with the times and improve their products. On the latest models of routers, on the bottom or lower part there is a sticker indicating all the important data. Including login and password for connecting via Wi-Fi (if available), settings page address, login and password for authorization, device pin code and other information.

Remember that in all difficult situations related to setup, you can be advised by specialists from the technical support service of your Internet provider. True, they are reluctant to help in matters of setting up a Wi-Fi network, because... this does not apply to the services they provide. But they simply must set up an Internet connection.

I hope that this information helped you understand at least a little about the difficult issue of connecting to 192.168.1.1 and the login and password admin/admin worked. If so, share the article on social media. networks or ask your questions in the comments. Good luck to all! 🙂