How to turn on GPS on Android Samsung. How to set up a navigator on a mobile phone: step-by-step instructions. Where and how to download Yandex Navigator to your phone

Ten years ago, car GPS navigators were a curiosity on the domestic market. electronic devices. But today it is difficult to surprise anyone with the presence of built-in global positioning systems in modern smartphones and tablets.

General information about GPS

Most modern smartphones and tablets on the mobile device market today are equipped with a GPS module for determining location. This is a really convenient and advanced option. In addition to plotting a route for a car or bicycle on the ground, the GPS module will be able to determine its own location with high accuracy up to tens of meters. Along with this, the system makes it possible to turn on some programs or activate the reminder function on the phone when you are in a certain point of the globe. on Android?

The main disadvantage of GPS positioning

The main disadvantage of GPS positioning in a smartphone is the rapid drainage of the battery. In this regard, an important point is the correct adjustment of the operating mode. Below we will discuss the basic tools for how to set up GPS on Android, as well as the principles of working in the engineering menu of a smartphone in case of incorrect functioning of the system.

Enabling GPS operating mode

To enable GPS navigation, you can use the notification panel of your smartphone. The enabled positioning system is displayed at the top of the screen in the form of a periodically flickering circle. To change or view how GPS functions, you need to go to the smartphone settings, then to the “Personal Data” section, from there to “Location” and select “Mode”. Typically, the operating system provides three options to choose from, including “By device sensors,” “Battery saver,” and “High accuracy.” If we are talking about phones that use latest versions"Android", the menu may look slightly different. How to set up GPS on Android 5.1? In this case, the listed items will be named “By all sources”, “By network coordinates” and “By GPS satellites”.

Highest level of GPS accuracy

The most accurate positioning option is the “High accuracy” or “Across all sources” mode. At the same time, with this operating procedure, battery consumption will be the most intense and rapid. In this mode, the system tries to determine the location by all means available to it, namely: GPS, Wi-Fi and using mobile networks. The smartphone will constantly evaluate the space for the presence of a signal and try to determine the location not only in open areas, but also indoors.

This operating procedure is also sometimes called A-GPS. Its distinctive feature compared to the operation of conventional navigators is the ability to obtain additional service information about satellites via an Internet connection. This speeds up the search for satellites and obtaining data on their signals.

Other modes of global positioning operation

The GPS operating mode “Battery saving” or “By network coordinates” is used to receive signals exclusively from wireless networks. In this case, the GPS module is not used. Of course, in this mode the accuracy of position determination is somewhat deteriorated. At the same time, indoor position can be determined using Wi-Fi.

The operating mode “By device sensors” or “By GPS satellites” can only function in open areas in the absence of interference. In this case, the position of the object is determined using satellites. If interference occurs in the form of high-rise buildings or walls and ceilings of premises, the satellite signal will be lost and the position will no longer be determined. It would be appropriate to say that this article is about how to set up GPS on Android without the Internet. But it should be noted that such installations are also possible using the World Wide Web. In this case, the Internet is used to correct the situation when there is insufficient good signal from satellites.

The last operating mode is the most economical for the battery. In addition, you can disable determining your own position on the ground in the notification panel. If you need to get a route from point A to point B, you can turn on positioning and follow the prompts of the navigator built into your smartphone. If you need a personalized search for an object, you should give preference to the "Battery Saver" mode. Well, if the phone has a powerful and capacious battery, the user may well choose the most expensive method of operation, “High precision”. The methods described above are suitable for solving the problem of how to set up GPS on Android through the main menu of the device.

Configuration using the smartphone’s engineering menu

However, some smartphone models, especially those made in China based on MTK processors, may experience connection difficulties or unstable communication. There are even cases when the device does not determine the location of an object at all. This is due to incorrect configuration of the GPS module for operation in domestic latitudes.

This software malfunction can be leveled out and GPS can be configured on Android via engineering menu mobile device. It should be emphasized that you can use this functionality on devices on which the mode is activated Root works, giving the user the opportunity to control the smartphone as developers.

Next, you should perform a series of sequential operations. First you need to turn on GPS and Wi-Fi and go outside or to the balcony of your room. After this, you will need to enter the engineering menu by entering the combinations on the phone keyboard: *#*#3646633*#*#, *#15963#* or *#*#4636#*#*. It should be noted that on different models On smartphones, the symbol combinations may be different, or even not suitable at all. Then, to solve the problem of how to set up GPS on Android, you can use the Mobileuncle ToolHero application, in which, after launching, select the desired item and enter the engineering menu.

Here the user will find several bookmarks, from which he must select Location, and then go to Location Based Service. In the EPO line, you must check the Enable EPO and Auto Download boxes. It should be clarified that EPO is system file, which contains information about the coordinates of GPS satellites and their lines of movement. This item is often deactivated on some phones.

Now you need to go back a step and select YGPS, and then go to the Satellites tab, in which the user will find a map of the position of the satellites in orbit. If satellites are displayed in red, this indicates that mobile device sees them, but cannot receive a signal from them due to incorrect settings.

To fix this problem, you need to go to the Information section, click full, and after a few seconds AGPS restart. After this, you need to return to Satellites and wait until the satellite icons turn green. It is best to carry out this operation in an open area, since on the balcony, due to significant interference in the form of house walls and trees, the signal quality is much worse. The last step is to reboot your device, be it a smartphone or tablet. Thus, the most common ways to set up GPS on Android are discussed.

All modern tablets and smartphones have a built-in location sensor (GPS). With its help, you can get directions to the desired geographical point. This function of your gadgets is especially good if you find yourself in an unfamiliar area. This device has only one drawback - the GPS sensor greatly drains the battery. You can help your smartphone or tablet run more efficiently by disabling this feature. But, you can do something smarter and configure the GPS sensor correctly. In this article we will tell you how to do this.

GPS sensor is an important component of modern mobile devices. Indeed, in addition to helping you correctly navigate the area, you can use it to activate reminders “tied” to a specific area. Some applications generally “refuse” to work on smartphones or tablets without enabling the location function. Therefore, you will not be able to completely disable the GPS sensor and fully use your gadget.

You can enable (or disable) GPS in the Android notification panel. It is activated using this icon:

In order to determine its operating mode, you need to follow this path:

After this, a menu will appear with three options:

• "According to all sources". This is the most accurate mode of operation of your device's GPS module. But it is precisely this “precision” that wastes the energy reserves of your battery. This mode uses satellites, Wi-Fi and mobile networks. If you have this mode enabled, it means that the module responsible for the operation of this function is constantly in the active position. It monitors the space and easily helps determine the location not only outdoors, but also indoors. Unlike navigators, devices that are used to plot routes, smartphones have the ability to use not only satellites, but also other sources. For example, the Internet. With its help, and with the help of certain utilities in your gadget, it can show the location even without connecting to satellites.
• "By network coordinates". Actually, this mode is described in the previous paragraph. But, unlike the “Across all sources” mode, it uses only wireless networks (Wi-Fi, Bluetooth and mobile networks). When you select this mode, communication with satellites is disabled, which helps to significantly save battery power. At the same time, the accuracy of location determination does not suffer critically.
• "By GPS satellites". Unlike the previous mode, this only uses GPS satellites and the device module that processes their signals. By selecting this mode and entering a room, your gadget will “lose the scent”, since the signal with satellites will be lost.

If you want to increase the life of the device from one battery charge to another, then set the “By network coordinates” mode. It's also a good idea to deactivate the location mode in your device's notification panel.

If the battery of your smartphone or tablet can handle the load, then turn on the “Across all sources” mode. Thanks to it, you can not only more accurately determine your location, but also use personalized Google search.

Configuration via the engineering menu

Unfortunately, not all devices can quickly find satellites, connect to them and maintain a stable connection. Some cheap smartphone models cannot boast of flawless operation of the GPS module. And this can affect you at the most inopportune moment. For example, when you need to figure out where to go while in an unfamiliar area.

One of the reasons for problems with the GPS sensor is its incorrect operation in the latitudes of our country. This happens especially often with Chinese cheap smartphones. But this situation can be corrected with the help of simple manipulations with such a sensor through the engineering menu. To do this, you need to have superuser rights (How to do this? Read).

Turn on your Wi-Fi connection and GPS and go out into the open. A balcony can also be used for this purpose.

Above are three engineering codes. One of them should suit your device. But, if none of the listed codes work, then use the program Mobileuncle ToolHero. With its help, you can access the engineering menu from devices that do not support the above mentioned engineering codes.

Mobileuncle ToolHero

You need to select a bookmark in the program Location. To do this, you need to scroll a little to the left. In this tab, go to the item Location Based Service.

In the tab EPO need items Enable EPO And Auto Download make active. EPO is a file in your system that is responsible for the coordinates of satellites and their trajectories. Initially, it is not active in all devices.

Now you need to go to the point YGPS(to do this, return to the previous level). In the Satellites section you can see the current satellite layout. If satellites are visible on the diagram, then the device also “sees” them.

Go to the tab Information and choose full. Wait a couple of seconds and press AGPS restart.

We return again to the satellite layout diagram (Satellites tab). The dots next to the satellites should turn green. This means that the device can connect to them.

IMPORTANT: Sometimes, even with the correct GPS settings, the device may not always connect to satellites. This may be affected by interference, bad weather and other situations.

Reboot your device. After the steps described above, it should receive the signal better GPS, find and quickly connect to satellites.

As you can see, configure the module GPS and select the most optimal mode of operation of the function "Location" simple enough. If you still have any questions regarding this article, be sure to write them in the comments.

Video. How to fix and calibrate GPS on your Android device?

Android is one of the two (the second IOS) most common operating systems for tablets and smartphones Samsung Galaxy, LG, Lenovo, etc.

Its advantage is large free applications, supporting GPS navigation. Unfortunately, the quality of many of them leaves much to be desired.

Some of the most popular and free gps applications running on a phone running Android 6.0, 5.1, 4.4, 4.4 2 and so on are Google Maps, Yanosik, MapaMap, Navatar.

Your Android tablet or smartphone offers enormous possibilities and can serve as an ideal travel guide.

It can take you directly to your place of residence using various audio-visual aids.

To enable the GPS module on your Android, make sure that it is built into your phone.

This can be determined by the GPS Test application and then run the global positioning system on our device.

How to check that a tablet or smartphone has GPS and turn it on

The easiest way to find out if your phone has built-in GPS and turn it on is to use a special GPS Test application.

If you know that your device has it, then you can proceed directly to enable it.

If you are not sure, download the application from the play market, which automatically determines the signal level. Once installed, you should see a screen similar to the one below.

If there is a green icon in the status window in the upper left corner, this means that GPS is turned on. If the icon is red, then it is turned off - then you need to enable geodata.

The application will automatically take you to the geolocation options where you must enable GPS (geodata). Please note that the location of this menu may vary depending on the device and operating system version.

How to enable GPS on a smartphone with Android 6.0 and Android 5.1

If you have not installed the application, open “Settings” and go to the “Privacy and Security” section.

Then click on the “Geodata” item.

Now just move the slider to the right to enable the built-in GPS module in your Android phone.

NOTE: the above images are from a Samsung Galaxy A3 smartphone running Android 6.0.1.

How to enable GPS on a tablet with Android 4.4 and Android 4.4.2.

To enable navigation, open “Settings”, go to the “My location” section and check the appropriate boxes.

Then log into your desktop, go to “Menu” and click on the “Navigation” icon.

How to enable voice GPS on an Android phone

IN Google Play The market has many programs for GPS navigation. Unfortunately, most of them either have very limited functionality or require payment.

Open the application, read the terms of use and accept them. On the next green screen, click Next.

Then select a country from the list and click "Import" to download road maps. You can download more later.

Maps take up many megabytes and downloading them using mobile internet(eg 3G) can be quite expensive. Therefore it is better to use wifi.

Maps may take a few minutes to download, depending on the speed of your internet connection and the size of the map. Once loaded, you will see a green screen, slide it to the left and then click "Let's get started"

To make using the application easier, I recommend starting with your home address (or the one you will use most often).

To do this, go to the home screen in the top left corner and enter the address in the search field, then select an item from the list and press Enter.

The map will open. Click the gray block with the address. In the new window, click set as “Home” from the list below. In the new window, click set as “Home”.

The application will display a map. To return, click on the three lines icon in the lower right corner.

Over time, you will discover that Navfree has many additional options. For example, the route can be changed in many ways. You can add stops, select a tour and set a security mode.

If you are traveling internationally, I recommend downloading additional maps in the update.

Navfree settings also allow you to switch to pedestrian mode, which is useful when walking.

The night mode is also noteworthy. Thanks to it, your smartphone or tablet will not distract you with too high brightness.

How to turn on GPS without internet

When using GPS, it takes data from antennas. The accuracy and quality of such navigation is not ideal.

It is much better if the data comes directly from satellites. Then navigation occurs without the Internet.

For me, the best application for this is the “Navitel Navigator” application; it uses the locator built into the phone, but is paid.

Despite the growing infrastructure in our country, you can still find places where wireless Internet access is not possible, so GPS without a navigator will come in handy and not only in places without Internet coverage.

Today there are many applications that allow you to download previously selected maps to your smartphone or tablet for later use.

Programs for GPS navigation and their brief characteristics

• Google Maps is one of the most popular applications on the phone. Works quite well on line and has the ability to display Google orthomosaics.
• Yanosik - works on the Internet, the service is a little complicated, but the user has access to current information about traffic jams, accidents and radars.
• MapaMap - works offline (without the Internet), but the most useful feature is only available with a subscription.
• Navatar works online and has many useful features.
• OviMpas - work via the Internet. Available for Nokia phone users.
• Route 66 - works offline (without the Internet), and the online version is available after purchase.
• Vito Navigator - works offline (without the Internet), the basic version (free) is very modest.
• NaviExpert - works online, free trial version only.
• Skobbler free version only in offline mode, modest selection of functions.

That's all. Good luck.

The GPS system allows you to easily determine the user’s location, provided that he is in an open area, and thanks to this original option, you absolutely cannot get lost anywhere. However, it happens that after flashing the phone, the GPS option stops functioning normally, and you need to know how to configure it correctly. In this article we will look in detail at the questions: how to turn on GPS on Android and configure it correctly for yourself.

Global positioning systems, or the so-called GPS in Android navigators, are usually equipped with two modules - triangulation and satellite coordinates.

Triangulation method

When using the triangulation method, current coordinates are calculated using located cell towers, and this method is not accurate - there is an error of up to 150 meters, which does not always satisfy the specified conditions. In addition, the coordinates of the device can also be determined via wireless Wi-Fi network, however, even in this case the accuracy will not be the highest. In order to enable this module for determining coordinates and meta-position, you need to go to the “Settings” section, select the item "Location Services", or something similar, depending on the type of device you have. In the menu that appears, you need to select the item « Wireless network» , after which your location will be determined quite quickly - within a minute or several minutes.

Satellite coordinate method

The method in which the location and coordinates are established using communication satellites is slower, but on the other hand, more accurate, since deviations are no more than 2-5 meters. One of the biggest disadvantages of this method is that you must be in an open area, otherwise the satellite signal will not be able to determine your coordinates. Enabling this option is carried out in the same way as in the previous case, with the only exception that you will need to check the box in the item “GPS satellites”.

GPS Calibration

GPS calibration may be required in cases where your mobile device, for some reason, cannot accurately determine a particular position. In this case, you need to use a special program that allows you to determine the parameters of the COM port through which the GPS module is connected to the navigation program.

The principle of working with the program is very simple - scan all CJM ports and enter information about those that are used directly into the navigator settings. As such a program you can use GPSInfo, ScanGPS and others, of which there are quite a lot on the Internet.

Many phone owners operating system Android is faced with a problem when the built-in GPS module refuses to find GPS satellites or finds them, but cannot connect. There may be several reasons for this behavior of the module, let’s consider the main ones:

The parameters for connecting to satellites are entered incorrectly in the settings file;

An A-GPS module is installed, which often does not find satellites on the phone on its own;

The module is not working.

I would like to look into the problem with the A-GPS (Assisted GPS) module, since Chinese phones that have it in 98% of cases are now extremely popular and are pushing global brands out of the market.

How does A-GPS work?

The main difference from the standard GPS module is that it connects not only with satellites, but also with towers mobile operators, which significantly improves the quality of location determination. When this function is enabled, the phone often cannot connect to GPS satellites itself and requires a “Full restart”, even if it was just turned on. It's not the problem themselves Chinese phones, namely the A-GPS module, which costs a penny compared to GPS, and therefore works accordingly. Let's figure out how to set up GPS on Android.

How to determine whether an A-GPS or GPS module is on your phone?

If you have a phone with two SIM cards and made in China, there is a 99.9% chance that you have A-GPS. But to make sure of this, you can go to the engineering menu. This will begin the process of fixing the issue of a broken connection with satellites.

To enter the engineering menu, you need to dial the following number in your phone: *#*#3646633#*#*. If the combination does not work, you can try entering *#15963#* or *#*#4636#*#*, however, in this case your menu may be different.

After entering the phrase, you are automatically taken to the engineering menu and will see a window with the following content:

You need to move to the left, scrolling through the settings pages to the “Location” tab.

Now select the first option “Location Based Service”. If you have the A-GPS tab, then follow the further settings. Otherwise, this article will not help you much.

Setting up GPS on Android

If you have an A-GPS tab, go straight to it. You should have a window that looks like this:

Compare the settings with yours, adjust if necessary, according to the screenshots:

If everything is written correctly, you can go back one level to selecting the “Location” items and go to “YGPS”.

Here you see that your GPS module does not find satellites, or rather, it finds, but does not connect due to incorrect inclusion:

You need the "Information" tab. The main manipulations will be carried out in it.

As you can see, the status is “UNANVAILABLE”, and TTFF is stuck forever searching. No matter how long you wait, nothing will change.

The essence of fixing the eternal search is to do full reset“Full”, and then, after 2-3 seconds, click on “A-GPS Restart”. Those. you reset the frozen search process to zero, thereby overwriting all preset settings, and immediately reboot the module. Not having time to pick up the standard configuration (incorrect), the module with clean slate finds all satellites.

After 10-20 seconds, you will see satellite signals on the “Satellites” tab, and after another half a minute the module will successfully connect to them.

The search was done from the 1st side of the house, on the balcony, respectively; nothing was found on the second hemisphere. You will find all your companions on the road.