home › Repair › Curly braces in word. All the ways to put square brackets in Word

Curly braces in word. All the ways to put square brackets in Word

While working in Word, the user often resorts to various tricks and shortcuts to solve an existing problem. IN text editor symbols can be inserted in several variations. In our case, you can also put brackets in Word in several ways. After all, you often have to enclose fragments of text either in square brackets or in curly brackets. Therefore, we will analyze all the options one by one.

Square brackets

To insert a square bracket, the following methods and actions will help:

Method 1: using Russian letters

Initially, you need to place the mouse pointer at the place where the bracket should open. Next, check the keyboard layout (must be an English layout - you can enable it using the Shift + Alt key combination). Click on the Russian letter “x” - an opening bracket “[” will appear, and to close, click on the letter “b” - the bracket will be a closed bracket “]”.

Method 2: Symbols

Using the famous Symbols function, you can insert square brackets. Here's what you need for this:

Method 3: Using Sign Code

If you open “Insert” - “Symbol” - “Other symbols” and in the window that opens, click on the bracket, you will see the symbol code. The picture below shows everything.

You can use the code like this:

Braces

This type of brackets can be placed in the following three ways:

Method 1: Keyboard shortcut

First, change the letter input method to “English”;
Hold down the “Shift” button and press the Russian letters “x” and “ъ” alternately.
(It should work out like this).

Method 2: Symbol Function

You should open the familiar section “Symbol” - “Other symbols”.

In the pop-up window in the “Set” indicate “Basic Latin”. Next, select the curly brace and click Insert.

Method 3: Curly brace code

To open we write:

Attention! Use the English keyboard layout to write the character code.

007B, then you need to press the button combination “Alt+X”;

To close:

Type 007D and press “Alt+X”.

Also articles about working with symbols in Word:

How to put emphasis in Word?
How to put square brackets in Word?
How to put quotes in Word?
How to draw an arrow in Word?

A curly brace in Word is simply installed according to the text using a keyboard on the English layout, but if you need to install a large curly brace covering several lines, you need to resort to additional options. Next, we’ll look at how to put a curly brace in Word through the menu.

Depending on where you need to make curly braces, in a formula or in text, the corresponding menu is used. To install a curly brace in a formula, you must use the “Equation” menu, but now we will focus on installing a curly brace on the text, for which you need to use the “Shapes” menu item on the “Insert” tab.

After selecting the “Shapes” menu item, a list of all possible installable shapes opens, among which you can find the curly braces we need.

To install any such curly brace in Word, you need to select it, and then left-click on the text in the required place and, without releasing it, stretch it to the required size.

After installing the bracket, the “Drawing Tools” tab appears, where the menu for additional settings figures. The installed curly brace can be moved to any place in the text, and its size can also be freely changed using the “Size” menu, or simply by stretching it with the mouse.

Microsoft Word training for beginners

Those who often use MS Word for work probably know about most of the capabilities of this program, at least those that they often encounter. In this regard, it is much more difficult for inexperienced users, and difficulties can arise even with tasks whose solution seems obvious.

One of these simple, but not everyone understands, tasks is the need to put curly braces in Word. It seems that this is extremely simple to do, if only for the reason that these same curly braces are drawn on the keyboard. By clicking on them in the Russian layout, you will receive the letters “x” and “ъ”, in the English layout - square brackets. So how do you put curly braces? This can be done in several ways, each of which we will talk about.

Lesson: How to put square brackets in Word

Using the keyboard

1. Switch to the English layout ( CTRL+SHIFT or ALT+SHIFT, depending on the settings in the system).

2. Click in the place in the document where you want the opening curly brace to be placed.

3. Press the “ SHIFT+x", that is " SHIFT” and the button on which the opening curly brace is located (Russian letter “ X”).

4. An opening bracket will be added, click where you want to place a closing bracket.

5. Click “ SHIFT+ъ” (SHIFT and a button containing a closing bracket).

6. A closing parenthesis will be added.

Lesson: How to put quotes in Word

Using the menu "Symbol"

As you know, MS Word has a huge set of symbols and signs that can also be inserted into documents. Most of the symbols presented in this section will not be found on the keyboard, which is quite logical. However, there are also curly braces in this window.

Lesson: How to insert symbols and signs in Word

1. Click where you want to add an opening curly brace and go to the tab "Insert".

2. Expand the button menu "Symbol" located in the group “Symbols” and select “Other symbols”.

3. In the window that opens, from the drop-down menu "Kit" select “Basic Latin” and scroll a little down the list of symbols that appears.

4. Find the opening curly brace there, click on it and press the button "Insert" located below.

5. Close the dialog box.

6. Click where you want the closing curly brace to be and repeat steps 2-5.

7. A pair of curly braces will be added to the document in the places you specified.

Lesson: How to insert a checkmark in Word

Using special code and hotkeys

If you carefully looked at everything that is in the “Symbol” dialog box, you probably might have noticed the section “Sign code”, where after clicking on the required symbol, a four-digit combination appears, consisting of only numbers or numbers with large Latin letters.

This is the character code, and knowing it, you can add the necessary characters to the document much faster. After entering the code, you must also press a special key combination that converts the code into the required symbol.

1. Place the cursor where you want the opening curly brace to be and enter the code "007B" without quotes.

2. Immediately after entering the code, press “ALT+X”- it is converted to an opening curly brace.

3. To enter a closing curly brace, enter the code “007D” without quotes in the place where it should be, also in the English layout.

4. Click “ ALT+X” to convert the entered code into a closing curly brace.

That's all, now you know about all the existing methods by which you can insert curly braces in Word. A similar method is applicable to many other symbols and signs.

We are glad that we were able to help you solve the problem.

Ask your question in the comments, describing the essence of the problem in detail. Our specialists will try to answer as quickly as possible.

Did this article help you?

The curly brace may not be the most important element when working in Word, but sometimes it is used in texts or in formulas. Keyboard input

elementary. We will look at other, less obvious ways.

Parentheses can be used for different purposes, consider inserting a curly brace for text. You need to go to the “Insert” tab and click on the item called “Shapes.” In it you can see various figures, among which we select the brackets we need.

An alternative way is the “Symbols” item, which is located in the “Insert” tab. Everything is done in the same way as above. You need to select a curly brace from among the characters.

Do you know how to put square brackets in Word? If yes, then you still won’t name four ways to do it, but they exist. These are the ones we will talk about in this article. We will look at the most trivial methods, and the most sophisticated - those that few people will use, but they still exist. As they say, just in case.

We use a standard keyboard

The way that everyone knows is to use the corresponding keys on the keyboard. It might not be included in the article, but for users who are just starting to master the computer, it is necessary to know it. Therefore, we will now tell you how to put square brackets in Word using the keyboard.

By looking at it, you can find the icon of square brackets on the Russian keys "X" and "Ъ". Of course, pressing these keys while the Russian language is selected in the system will not achieve anything - the corresponding letters will be printed. The trick is different. You should change the system language. For those who don’t know, this is done by pressing ALT + SHIFT or CTRL + SHIFT (depending on the system itself). If this option seems complicated to you, then you can change the language by clicking on the corresponding button on the taskbar. You can see its location in the picture.

Once the system is set to English, you can safely press these buttons. So you have learned how to put square brackets in Word using a regular keyboard. Well, now let's move on.

Using special characters

Now let's figure out how to put square brackets in Word 2007 using special characters. Of course, this method may work on other versions of the program, but the example will be given on the specified one.

Initially, you should open the corresponding window in Word. To do this, initially go to the "Insert" tab. In it you need to find the "Symbol" button. It is located on the right side of the ribbon. By clicking on it, you will open a menu in which you need to select “Symbol”.

So, desired window open. You need the place in the drop-down list called “Set”, select “Basic Latin”. After this, symbols from this category will appear in the main field of the window. Scroll down the table, find the ones you need and highlight them. After that, click the "Insert" button and they will be printed in the document.

Now you know the second way to put square brackets. In Word 2010, by the way, this method works on a similar principle.

We use hexadecimal code

Now we will tell you how to put square brackets in Word using hexadecimal code. This method, rather, belongs to the category of sophisticated ones. Now you will understand why.

Here is the hexadecimal code for the character "[" - 005B, but for the character "]" - 005D. As you can see, remembering them is quite easy. Now we'll tell you how to use them.

In order to insert square brackets into text using this method, you need to enter this code into the text itself, and then press the ALT + X key combination. You can try this right now, after this operation your code will turn into the character you need.

We use formulas

By the way, when you opened the table of special symbols, in the drop-down menu, next to the “Symbol” button, there was a second icon - “Formulas”. Now we will just talk about how to insert square brackets using formula input.

This method is unlikely to be used for normal typing in a document, but if you want to enter a formula into it, then it will come in handy.

So, as soon as you click this button, a form for entering an equation will be inserted into the text, and the equation designer will open in the toolbar. In the designer, find the "Bracket" button and click it. In the menu that appears, you need to click on the square brackets, between which there is a translucent square. After clicking, this form will appear in the document. Click on that square and enter text - it will be inserted between the brackets

Using Alt code

The article provided ways to latest versions"Word", now it's time to talk about how to put square brackets in "Word" 2003. Although this method works anywhere and even outside the named program.

The method is very simple: you just need to remember the sequence. For the "[" bracket, it will look like a combination of three keys: ALT, 9 and 1, and for the "]" bracket - ALT, 9, 3. By pressing them, you will get the desired result.

One of these simple, but not everyone understands, tasks is the need to put curly braces in Word. It seems that this is extremely simple to do, if only for the reason that these same curly braces are drawn on the keyboard. By clicking on them in the Russian layout, you will receive the letters “x” and “ъ”, in the English layout you will receive square brackets […]. So how do you put curly braces? This can be done in several ways, each of which we will talk about.