home › Repair › This accessory is not certified. What to do if the wire does not charge your iPhone. “This cable or accessory is not certified...”

This accessory is not certified. What to do if the wire does not charge your iPhone. “This cable or accessory is not certified...”

“This cable or accessory is not certified...” is a message that you may not have encountered personally, but you have definitely heard about it. We all know how short-lived original lighting from Apple is and how expensive they are. Buying a cable not from the manufacturer is fraught with unpleasant consequences. They usually find out about them when it is too late. What to do if you find yourself in a similar situation? How to charge your pet? And why might such an alert occur if everything was fine up to this point?

Why do users buy replicas?

The purpose of buying a copy cable is clear - the desire to save money. The Chinese-made analogue is cheaper than Apple products. At the same time, a scary message with the text “This cable or accessory is not certified” sometimes does not appear immediately. Someone may have a question: how exactly does the phone recognize that the connected cord is not “native”?

The bottom line is that a special component is installed in this original lighting - a microcontroller. One of its functions is to ensure that the charging and data transfer process can occur regardless of which side you insert the cable into. This microcontroller is most likely missing in Chinese replicas. Alternatively, it is damaged or simply does not meet the phone's requirements. Because of this, problems subsequently arise.

What problems might arise from using such a cable?

As you can see, Apple strictly monitors the use of products not made by itself. Special devices do not allow charging; a message appears on the screen stating that this cable or accessory is not certified, so the reliability of its operation is not guaranteed.

Of course, one of the main reasons for this phenomenon is the monopoly on production. But the representatives themselves name another, no less significant one: a fake cable is almost guaranteed to cause serious harm to your iPhone. Firstly, if you use a Chinese replica, the Apple phone may simply stop charging and connecting to the computer. As a rule, at the most inopportune moment. Secondly, the original lighting is designed specifically for iPhone. Using a fake may damage the Apple phone due to technical inconsistencies. Then your losses will be much more serious than the cost of buying a new cable.

A simple method that can make a non-original cable work

Let's say a phone, on the screen of which a message appears that this cable or accessory is not certified, does not charge. What should you do if you can’t find a replacement cable right now, but you definitely need to charge your phone? No one gives a 100% guarantee, but sometimes this method helps:

First, try inserting the cable the other way.
If all else fails and the same message appears on the screen, close it.
Unlock your phone and the alert will pop up again. Close it again.
Unplug the wire and then immediately plug it back in.
In some cases, after this, charging begins to occur as usual.

How to charge a device with a copy by turning off the phone?

Another simple option on how you can try to make a non-original cable work:

Connect the wire to the device. A warning will appear on the screen. But you shouldn't pay attention and take out the cable.
Turn off your phone. At the same time, make sure that lighting remains connected.
If this method is suitable for your phone, the charging process will begin. A disconnected device cannot check the cable and “notice” that it is a copy.

This cable or accessory is not certified: how to bypass it via jailbreak?

This cable or accessory is not certified... This problem can also be solved through jailbreak. The algorithm of actions is as follows:

Jailbreak your phone.
Launch Cydia and go to the Sources tab.
Here you should find the item Support Unsupported Accessories 8. It is this modification that is responsible for activating support for non-original devices.
This tweak is absolutely free. Feel free to click “Install”.
After rebooting the device, the changes made should take effect.

Now when connected charger the process should proceed without problems. The message may still appear. However, this will not affect the result.

What to do if a problem with a lace appears out of nowhere?

A gadget that displays the notification “This cable or accessory is not certified” is not charging? What to do if yesterday you attached the same cord, and everything was fine? And are you sure of the noble origin of your cable? There may be several reasons:

Over time, any equipment deteriorates. The charger connector may have become oxidized or dirty. Carry out a visual inspection. Dirt can be removed with any stick, but use sharp iron objects! This will only make the problem worse.
Assess the condition of the wire itself. A message that a given cable or accessory is not certified may appear even from the original model if it is damaged. The weakest points are the articulation points. Minor damage can be repaired. But if the shell is seriously damaged, there is only one way - to the store.

Now, if the message “This cable or accessory is not certified” appears on the screen, you already know what to do. But it’s still better not to skimp. Therefore, advises you to buy original lighting. Otherwise, the consequences may be more serious than just a dead phone. Then the iPhone will have to be taken to a service center, which will entail even greater expenses than purchasing the original cable. It’s better to allocate a certain amount and buy the necessary lace than to pay twice later. By the way, the new cable can be further strengthened. Then it will last much longer.

fb.ru

This cable or accessory is not certified or supported. What to do if such a message appears?

China rules! But not in this case and here's why.

In the comments on our site, readers are still asking questions related to the use of USB cables for iPhone and iPad. Some people complain that when charging or syncing with iTunes, a message appears on the smartphone screen stating that “this cable or accessory is not supported or certified.” In this case, the device does not charge and does not synchronize, and it is also impossible to restore or update the gadget. Why do Apple smartphones and tablets not like some USB cables and what can be done about it?

These messages first appeared in iOS 7 on the iPhone 5 - “This accessory may not be supported.” On iOS 8 and later, the content of the message has changed slightly - “This cable or accessory is not certified and is not guaranteed to work reliably with this iPhone.” There are several reasons:

1. You are using a non-original and non-certified USB cable.

The Lightning connector only looks simple from the outside; under its shell there is a microcircuit with 4 microchips. We don’t fully know how they work and what a particular one is intended for, but it is reliably known that this controller:

Switches the contacts to which the iPhone is connected - the Lightning connector is double-sided and is inserted into the connector on either side.
Responsible for the secure transfer of information between the device and the computer when synchronizing with iTunes, restoring and updating iOS.
Limits voltage and current when charging the device.

Yes, the original Lightning cable is too expensive, for example, in Russian App Store They are asking 1,590 rubles for it. And this is for 1 meter of wire and two connectors, one of which is the simplest (USB).

Manufacturers of accessories spoke out in defense of user interests and offered analogues. However, “cable is different” and in pursuit of the lowest possible cost, some manufacturers (mostly Chinese) “forget” to add the necessary microchips to the Lightning connectors so that they at least comply with the MFi license. What kind of license is this?

MFi (short for "Made for iPhone/iPod/iPad" - Made for iPod/iPhone/iPad) is Apple's licensing program for manufacturers of accessories compatible with the iPhone, iPod Touch and iPad.

Made for iPod/iPhone/iPad means that this cable or accessory has been specifically designed to connect to your iPod, iPhone, or iPad and has been certified by the developer to meet Apple performance standards. Source.

Apple vouches for certified cables and accessories, for which it receives appropriate royalties from each unit, which means they are safe for your device (theoretically).

In addition to the price, original Apple USB cables have serious problems with durability: they quickly fray and break.

I myself stopped using the original Lightning cable from the iPhone 5s in favor of the black Juicies+ with lightning connector and I don’t regret it at all.

So, to ensure that your iPhone, iPod Touch and iPad are charged at the appropriate voltage and current, and sync without errors, use at least a certified Lightning cable. It is cheaper than the original one. But, if you don't have this option, there is a way to protect Apple and charge, sync and restore your iPhone using the cheapest cables.

"The cable is not certified." What to do?

In some cases it is enough:

Sometimes you need this:

For jailbroken devices in Cydia, find and install the “Support Unsupported Accessories 8” or “Unauthorized Lightning Cable Enabler” tweak.

Remember that the problem cannot be completely eliminated in this way - this is only a temporary solution. Apple can always block the “singed” cable at the iOS level. In addition, you risk running into an expensive replacement of the power controller - the cost of the service starts at $80.

There are times when the warning “This cable or accessory is not certified and is not guaranteed to work reliably with this iPhone” appears even when connecting the original cable, for example, if...

2. USB cable is damaged

If you are definitely using the original cable, and the ill-fated message still appears on the screen, your cable may simply be damaged.

If there are no visible signs of damage, to check, take a known intact (and, of course, original) cable and check the operation of your device with it. If it works, replace the cable with a new one.

3. The connector on the iPhone/iPod Touch/iPad is clogged

We have already written about this situation in a separate article. The bottom line is that various debris gets into the connector on an iPhone or iPad (this is especially true for Lightning connectors) and accumulates there for a long time. At some point, there is so much debris that it breaks the cable contact in the connector - and, accordingly, a corresponding warning appears. The solution is to carefully clean the debris from the connector. To do this, you can use a toothpick or a cotton swab moistened with alcohol. I advise you to clean the Lightning connector with your iPhone turned off.

Conclusion

And finally. Since 2008, I have always used the original cables to charge and sync my iPhone and iPad - it's safe and reliable. But if one of them was damaged and failed, I didn’t buy the other original one - it was expensive. Instead, I used a certified one, which I advise you to do. If you don’t have one at hand, you can charge the device once or twice with the cheapest cable, but don’t abuse it - the “unexpected” can sneak up unnoticed.

Instructions Lightning Cable

iphonegeek.me

“This cable or accessory is not certified”? Why does this message appear on iPhone and iPad?

When you charge your iPhone or iPad using the Lightning connector, you may see a notification on your screen that says, "This cable or accessory is not certified and is not guaranteed to work with this iPhone." Usually after this charging stops. What's the matter?

Below we will talk about three of the most probable reasons, by which you can see such a message - and we will explain what needs to be done in such a situation.

Before we begin, we will suggest you to do a simple procedure: first remove and then insert the cable back into the connector of the iPhone and iPad. It also wouldn't hurt to try connecting to a different USB port or outlet. If in your case there is a random system error(this also happens), this will help. If not, read on.

Reason #1. Use of non-original accessories

Most often, the above message appears when a non-original accessory is used - a cheap replacement for official Apple equipment. Users try to save on branded products - they cost a lot of money even before the crisis - and buy much cheaper accessories from nameless manufacturers. Sometimes these things work, sometimes they don't.

What to do? You can try to bypass the protection. For this:

Connect the cable to your iPhone or iPad;
Click "Close" when the message "This cable or accessory is not certified and is not guaranteed to work with this iPhone" appears.
Unlock your iPhone or iPad;
Click Close again when iOS displays the warning window;
Now - without blocking! - unplug the cable from the phone or tablet connector;
Reconnect the cable.

An alternative (and much safer for your device) option is to buy a cable that is guaranteed to work and won't harm your iPhone or iPad! There are always cheaper third-party accessories that work great—for example, the AmazonBasics Apple Certified Lightning Cable costs just $9.99. In general, you can recognize high-quality accessories by the logo with the inscription Made for iPhone / iPod / iPad (“Made for iPhone / iPod / iPad”) on the packaging.

Reason #2. Cable damage

The message “This cable or accessory is not certified and is not guaranteed to work reliably with this iPhone” may also appear because the accessory is simply broken. Possible reasons: the cable was in water, became a victim of corrosion or physical impact. In this case, it will have to be replaced with a new one - for example, with a legal and quite affordable alternative from Amazon or other manufacturers.

Reason #3. Garbage

A much less common, but still real reason is a physical obstacle to charging. The port can become clogged with crumbs, threads/lint, or any other contents from your pockets. This happens more often with the iPhone, but there are similar complaints from iPad users online. What to do? The solution is obvious - check the ports for stuck debris and clean them of foreign objects (for example, with a toothpick). If you don’t have confidence in your abilities, turn to specialists.

Some users iPhone or iPad at least once in your life you have encountered the appearance of an inscription on the screen of your gadget “This accessory is not certified to work with this iPhone.”. At such moments, firstly, there is an understanding that your beloved iPhone is about to run out of charge and turn off. Secondly, the brain begins to intensively think about what could happen to the cable.

Poor quality cable

The fact is that Lightning cables are quite expensive. A regular charger today costs 1,500 rubles on the official Apple website, and an extended version up to two meters costs 2,300 rubles. Quite a lot of money, which becomes the reason for buying cheaper Chinese analogues. Such cables are dangerous not only because they may not work correctly, but sometimes they can damage the device: incorrect voltage, etc. You should only buy accessories that are marked “Made for iPhone/iPod/iPad” or other confirmation from Apple. However, the Chinese are no strangers to cunning, so the presence of such an inscription cannot guarantee 100% protection. Buy quality accessories from trusted companies.

The cable is damaged

It could also be that your cable is damaged. Apple chargers (including those for Mac) suffer from this, when near one of the ends the wire breaks due to constant bending. Remembering the price of charging, we put off the moment of buying a new one in every possible way, applying electrical tape to the “wounded” copy and carefully putting it on the shelf in the evening. The author of the note had the same situation: the cable looked terrible and it was clear that it was living its last days. However, everything turned out to be much worse.

IMPORTANT: You can check if the problem is really with the cable by simply taking another cable and putting the device on charge.

Port problem

This is exactly the problem I never expected. For each of us, the iPhone/iPad is a kind of universal soldier that does not break. But that's not true. I don’t know what happened on my iPhone 5, but charging stopped working, the above message about “No certificate” appeared on the screen, and even charging a friend could not fix the situation. The service helped to figure out: the problem was in the port. The charging port is a vulnerable place, as water and a lot of dust can get there. They fix the problem in a maximum of an hour, it is relatively inexpensive.

What to do if the wire does not charge your iPhone

Hello! There is one more problem on the current agenda. What to do (or not do) when your iPhone won't charge? In this article we will look at the probable prerequisites for this and try to find a solution for each of them. BYPASSING PASSWORD IN iOS 10 or what to do if you forgot. So, if your iPhone has finished charging, sit back and read until the very end... I'm sure one of the tips below will help you.

As you have already figured out, there are more than several circumstances why an iPhone may not charge. Below I have collected the most common of them. Let's start with the most “harmless” ones, and then move on to the “cardinal” ones... Follow the stated order, and every time try to implement what you read. I'm sure some of the tips will definitely help you charge your iPhone.

Is it safe to charge your iPhone using an iPad charger? - read in this article
Is your iPhone draining abnormally fast? There is a solution! - read in this article

Reason #0: Software (firmware) glitch

Believe it or not, almost always the reason for an iPhone not charging lies in the software (firmware), and not in the hardware. If the iPhone doesn't work anymore Question: The iPhone turned off and won't turn on, what should I do? If you didn't know, there is a controller inside the iPhone (a chip on a board) that is responsible for charging the battery. What to do if Xiaomi Redmi 4 Pro freezes and does not respond. This controller works under the guidance software. Thus, when you connect the cord to the iPhone, power is supplied not directly to the battery, but first to the board with the controller, which in turn obeys the program built into the phone.

What can we do? And the fact is that the software component of the iPhone recognizes when a power source is connected to the phone and gives a command to the controller to start charging. If the software is frozen, no command will be issued and your iPhone will not charge.

To solve this problem, a hard reboot of the device usually helps. To do this, simultaneously press Home buttons and Power for at least 30 seconds.

If you need to reboot your iPhone X or 8, read this article
More detailed information on rebooting iPhone - can be found here

Reason #1: Lightning port is dirty

80% of the population carries their phones in their pants or trouser pockets... I don’t know about you, but I regularly clean out all kinds of garbage from my jeans pockets... where does it come from? Moreover, this garbage (dust, lint, hair, etc.) tries to sneak into any crevice of my iPhone.

Imagine! This is the first reason why the iPhone may not charge. You can’t even imagine how much lint and dust gets into the Lightning charging connector! The accumulated compressed dust does not allow the Lightning plug to fit properly into the connector hole, which leads to the problem above. Don't believe me?

Reason #2: USB port is faulty

If you are trying to charge your iPhone from a USB port, the first thing you should do is check if it works. At my work Windows laptop There are a couple of USB connectors from which the iPhone does not charge at all. I don’t know what this is connected with, but the phone does not receive a charge. It seems that 5V power is not supplied to these USB ports at all.

Some information for general development:
- Regular USB the port has an output voltage of 5V and a current of 0.5A
- Standard for comparison iPhone charging outputs 5V and 1A
- Well and iPad charger outputs 5V and 2A

Try this! If this is your case, try another USB port or connect your iPhone to a regular 220V charger. If your charger also doesn't charge your iPhone, read on for the next possible reason.

Reason #3: Charger/cable is faulty

The iPhone cable does not charge. Repair

The most common USB cable malfunction iPhone charging . ok... what if the original Apple charger doesn't charge the iPhone either? Then it was time to check the Lightning cable. I disassemble and repair in a few minutes

iPhone won't charge? Charging problems? We will suggest a solution to the problem

In this video, we'll tell you what could be causing the Apple charging cable to not work correctly. iPhone,iPod,.

OK, I won't be original when I say that Real Apple chargers are quite expensive. It’s another matter if you buy an iPhone charger on AliExpress (from China) - after all, it will cost you several times cheaper. BUT! BUT! BUT! I strongly do not recommend doing this! Do NOT buy or use cheap Chinese non-original chargers under any circumstances. According to reviews from friends and personal experience, I can assure you that Chinese chargers will sooner or later play a cruel joke on your device if they don’t drive it into a “wooden box”. You must realize for yourself that " cheaper doesn't mean better“, and when it’s almost for nothing, doubts about the quality creep in.

So, if your iPhone does not charge from a Chinese (non-original) charger, I would DID NOT further EXPERIMENT and would try GET A REAL ORIGINAL CHARGER FROM APPLE. Everything should be clear here.

Okay - okay... what if the original Apple charger doesn't charge the iPhone either? Then it was time to check the Lightning cable. My iPhone won't turn on, what should I do? What to do if the iPad or iPhone does not turn on and is on fire. Again, from personal experience, even the original cables that come with the iPhone fail over time. To be honest, the original cables are quite fragile to begin with. If you do not use them carefully enough, frequent bending will damage not only the outer plastic braid, but also the conductive “cores.” WHAT TO DO IF THE SENSOR DOES NOT WORK. I recently threw out my original cable because it began charging the iPhone to no more than 60%.

I have nothing against the lightning cables they sell on AliExpress. Here they either charge or not. Do you know how much an original 1m long lightning cable costs in the Apple Store? Fabulous 19. “modem mode” and what to do if it doesn’t exist. Wow! For this money you can purchase at least three excellent certified cables that will charge your iPhone without any problems. I tried a bunch of cables - from cheap ones for 0.99 to expensive ones for 10 from different manufacturers, and I can recommend you a really cool lightning cable from Ugreen (link to AliExpress).

How do I get up to 90% cashback for purchases on AliExpress - Instructions

“This cable or accessory is not certified...”

Some of you have probably already encountered the message “ This cable or accessory is not certified and is not guaranteed to work reliably with this iPhone." There may be several reasons for this, and we will consider them in a separate article. I will only say one thing - starting with iOS 7, Apple has taught its devices to recognize the authenticity of USB cables. As I wrote earlier, a special chip is installed in the Lightning cable plug that allows the iPhone (iPad) to recognize the origin of this cable. The Chinese, of course, learned to counterfeit Lightning chips, but with the release of iOS 7, Apple changed the rules of the game again. Therefore, try to use original chargers...

Try this! Use known-good original chargers and Lightning cables. If they don’t help, most likely one of the iPhone components has failed. Read about it below.

Reason #4: iPhone Battery

Any battery is a consumable item... This means that batteries do not last forever and require periodic replacement. I recently replaced the battery of my MacBook Air because... The battery completely stopped holding a charge and it became impossible to use the computer without a cord.

When charging an iPad or iPhone using the Lightning connector, the device may display a message that reads: “This accessory or cable is not certified and therefore cannot be used reliably iPhone data not guaranteed." After this, charging will stop.

There are several reasons for this “strange” behavior of the gadget. But, before you start looking for them, you need to disconnect and then reconnect the cable to the Lightning connector. In addition, you can solve the charging problem by connecting to a different USB port or to a different outlet. But if there is no positive result, then the problem is hidden deeper.

Increase

Non-original accessories

The reason this message appears is the use of non-original accessories. Branded products are more expensive than “analogs” from unknown manufacturers. It happens that such things work well, and sometimes they flatly refuse to function.

As always, such protection of apple manufacturers can be bypassed. To do this, follow these steps:

connect the cable to your iPhone or iPad;
after the unfortunate message appears, click “Close”;
unlock the device;
When the message appears, click “Close” again;
without blocking, pull out the cable from the device connector;
connect the cable again.

A much better option is to purchase a cable that will work well and will not damage your expensive gadget. There are alternative inexpensive but high-quality accessories from third-party manufacturers. On their packaging you can see the inscription “ Made for iPhone / iPod / iPad.”

Damaged cable and debris

The cable may refuse to work due to a simple breakdown. The accessory may have become wet, corroded, or physically damaged. You will have to buy a new one, because such things cannot be repaired.

This is the most easily resolved cause of the cable support failure message. Debris is a physical hindrance to the charging process. Such cases are rare, but still occur. Threads, lint, crumbs, or other particles that are located at the bottom of the pocket may become trapped in the port. To solve this problem, you need to check the ports and, if necessary, carefully remove any debris stuck there.

Why do users buy replicas?

The bottom line is that a special component is installed in this original lighting - a microcontroller. One of its functions is to ensure that the charging and data transfer process can occur no matter which side you insert the cable into. This microcontroller is most likely missing in Chinese replicas. Alternatively, it is damaged or simply does not meet the phone's requirements. Because of this, problems subsequently arise.

What problems might arise from using such a cable?

A simple method that can make a non-original cable work

First, try inserting the cable the other way.
If all else fails and the same message appears on the screen, close it.
Unlock your phone and the alert will pop up again. Close it again.
Unplug the wire and then immediately plug it back in.
In some cases, after this, charging begins to occur as usual.

How to charge a device with a copy by turning off the phone?

Another simple option on how you can try to make a non-original cable work:

Connect the wire to the device. A warning will appear on the screen. But you shouldn't pay attention and take out the cable.
Turn off your phone. At the same time, make sure that lighting remains connected.
If this method is suitable for your phone, the charging process will begin. A disconnected device cannot check the cable and “notice” that it is a copy.

This cable or accessory is not certified: how to bypass it via jailbreak?

This cable or accessory is not certified... This problem can also be solved through jailbreak. The algorithm of actions is as follows:

Jailbreak your phone.
Launch Cydia and go to the Sources tab.
Here you should find the item Support Unsupported Accessories 8. It is this modification that is responsible for activating support for non-original devices.
This tweak is absolutely free. Feel free to click “Install”.
After rebooting the device, the changes made should take effect.

Now when you connect the charger, the process should occur without problems. The message may still appear. However, this will not affect the result.

What to do if a problem with a lace appears out of nowhere?

Over time, any equipment deteriorates. The charger connector may have become oxidized or dirty. Carry out a visual inspection. Dirt can be removed with any stick, but use sharp iron objects! This will only make the problem worse.
Assess the condition of the wire itself. A message that a given cable or accessory is not certified may appear even from the original model if it is damaged. The weakest points are the articulation points. Minor damage can be repaired. But if the shell is seriously damaged, there is only one way - to the store.

Popular in the category: