I like ttk-cheat. I like TTK-cheat Dir 300 firmware 1.0

The D1 is very similar to the process with other devices, but some people still have a lot of questions.

Basically, these questions are related to downloading the “D-Link DIR-300 NRU firmware” file from the website created by D-Link, as well as questions related to the updated interface in the firmware, which is clearly seen in the example of version 2.5.n

In this description, we will look at how to reflash the D-Link DIR-300 router by obtaining the latest firmware version 2.5.n from the website for the DIR-300 D1 model and how to perform the installation correctly, provided that the router was factory-installed with firmware with additions and updates 1.0.4. In this guide I will try to take into account all the nuances that arise during installation.

Firmware for router d link dir 300: stage 1

The explanation of how to flash DIR-300 is only suitable for routers that have the following letters on the bottom of the case: H/W: D1. If the values ​​are different, then you need to download a file with different firmware.

Where to download firmware d link dir 300

• We go to the manufacturer’s Internet project, which is located at http://ftp.dlink.ru in order to download the file itself.
• On it we go to the pub pack, then to the folder called Router, and then to the DIR-300 (underscore) NRU and in it we find the Firmware folder. It should be noted that inside the Router directory there are DIR-300 A D1 directories. Their differences are that one of them has an underscore, while the other does not have such a symbol, it is written in one word. To update the firmware of the D-Link DIR-300 router, you need the file that I specified.

The firmware itself is located in this directory.

They all end in .bin

When this article was written, the newest firmware file was created in 2013. I will install this version in this created in 2013. I will install this version in this guide.

Preparations before installation

If you know how to get to the settings section of the connected device, then in such a case you don’t have to read this section. The only thing I would like to note is that updating the firmware of the D-Link DIR-300 router and the main changes are best made using a connection to a modem using an Ethernet cable.

If the router is disabled and the user has not performed the previously described actions:

1. The router must be connected using a wire (supplied with the device) to a personal PC, using which the firmware will be performed. It should be noted that on a personal PC, the input for the network card is the LAN1 port on the device. If on your mobile PC similar port missing, you will have to skip this step. The connection occurs via Wi-Fi.
2. Connect the device to a power outlet. When using a Wi-Fi connection, after one to two minutes a network called DIR-300 will appear, which will not be protected by a password, provided that the name and other parameters have not been changed. You need to connect to the network that appears.
3. Open the browser and write where you usually write the URL of the desired site: 192.168.10.1. If the page does not open, you need to open the TCP/IP protocol parameters and check the box next to the inscription Obtain an IP and DNS address automatically.
4. When the form opens in which you need to register your login and password, you must enter admin. The first time, you will be asked to change your password. If you don't change it, New Password You must not forget, as it will be useful for subsequent entries into the device settings. If the password does not work, maybe you or someone else changed it before you, you need to reset all device settings. To do this, press and hold for a while the button called Reset, which is located on the back of the router.
5. If the above was done correctly, what we were aiming for begins: flashing the D-Link DIR-300 router.

D link dir 300 firmware update using example rev. B6

You will be shown the only one the necessary options, it depends on the version that is installed on the router. This is the settings interface.

In case number 1, if the DIR-300 NRU rev. firmware is installed. B6 version 1.n.n, you need to follow these steps.

• Click on the “advanced settings” item; if the Russian language is not displayed, you can change it in the Language section.

In the “system” item, click on the arrow pointing to the right

• Next is the software update.
• Now we indicate the firmware file that we just recently downloaded.
• Click on the button called “update”.

Having completed all these steps, the wait for the process to end comes. And now, the D-Link DIR-300 NRU firmware is finished. If suddenly you see that the installation process has stopped, or the page has stopped, you need to go to the “notes” section, which is located a little lower.

Router d link dir 300: Beeline firmware

This paragraph is needed for users who need DIR-300 NRU firmware improved version 2.n.n. Besides, this instruction suitable if you need to install firmware on a router from Beeline.

1. Go to the settings section
2. A menu will open where we select “System”, then updated software. If necessary, switch to Russian.
3. Go to the “local update” section and click on the “review” button. Next, we indicate where the *.bin file is located in file system your personal PC.
4. Click update.

WATCH THE VIDEO

Note

If it suddenly seemed to you that while the update was taking place or while the DIR-300 firmware was being installed, the router froze. It seems like this if you notice that in the display window of the browser page where the update is taking place, a special installation bar is constantly moving.

It appears that the page is not loading. This may happen because during a software update, the connection between the personal PC and the router stopped. You should wait two or three minutes and then connect to the device again.

When using a wired connection, recovery will occur automatically.

Then you should go into the settings again and see that the update has occurred.

Further, the necessary device settings do not differ in any way from the settings of the same models, but with different interface options. Differences in interface design are not scary. Now you know how to get the D-Link DIR-300 firmware and reflash the device. Still have questions? We write them at the bottom of the article!

Hello, dear readers of the inforkomp blog. So, as you understand from the title of the article, today I want to return to the topic again: setting up a wireless access point. To be more precise, I want to talk about: how to flash a router and why do it. I will show the process of resetting the software using an example. Wi-FI router Dlink Dir-300. But, if your router model is different from the one shown here, it’s okay, the process itself is the same, except that only the design of the settings window and the name of the menu items will differ.

Why did I decide to write specifically about the router firmware? First of all, the idea of ​​writing an article about router firmware update, but I couldn’t get it together and do it. The second reason is that recently, many of my friends have begun to ask me exactly this question: how to flash a router, what to press and what firmware to use.

As a rule, many users initially try to update it. For example, when purchasing or setting up a new device, I personally check the firmware version and, if possible, update it to the latest version. And you know what, my router has probably been working for more than a year now and has never frozen.

I believe that it is necessary to update the firmware on the router. The very meaning of updates is that when developers release new firmware versions, they correct all the shortcomings and errors that could appear when working with the Internet and the router. Moreover, the process of flashing the router itself is very easy.

Therefore, if you have serious problems with Wi-Fi, then be sure to read the article and try to reflash your Wi-Fi router.

Why reflash your router?

Well, there can be a lot of reasons to flash a router. Here are a few of them:

• 1. The most common reason is updating the firmware for stable and high-quality operation of the Wi-Fi signal;
• 2. No device receives a Wi-Fi signal;
• 3. The message that the smartphone and computer is constantly on;
• 4. The Internet cable inserted into the WAN port is not visible or not detected;
• 5. The Wi-Fi signal constantly disappears and appears; etc.

In general, there are simply a huge number of types of problems that the router firmware can help you deal with.

Preparation and selection of firmware

IMPORTANT!!!

• Choose your firmware carefully. Do not make a mistake in determining the hardware version of the device;
• Disconnect the Internet cable from the router, leaving only the power supply and connection to the computer;
• You should only flash the router using a network cable, which we connect to any port of the access point (except WAN), and the other side to the computer’s network card. You cannot update the router software using WiFi;
• All settings, passwords and logins will be reset to factory settings. What, after the update you will have to configure it again;
• Do not turn off the access point while flashing;

Well, let's start by determining the revision of the router and downloading the required firmware. In order to find out the hardware version, we need to turn the device over and look at the sticker with technical information. I have this " H/W Ver.: B5" And " F/W Ver.: 1.2.94“Therefore, for those who have the same revision or B6, then download the firmware here: link.

For those who have Dlink dir-300 NRU B7, download the update from this link, selecting the desired version. For owners of routers with revision B1, B2, B3, download. If you have a different router, then go here, and in the list that appears, select the device with the appropriate revision. Then, going to the folder " Firmware", which contains the latest firmware version in the form of a "bin" file.

Now, by clicking on the file, we save it to the computer.

Once again, be careful when choosing the firmware version. Because if you try to install the firmware that is required for revisions B1-3 on a router with revisions B5-7, this may cause it to break. And it will be possible to restore its functionality only at a service center by paying a certain amount for it.

Firmware for D-Link Dir 300 router

As always, for any setup, first use the technical data (password, login) indicated on the sticker. If you accidentally forgot your password, then you will need.

The web interface window of our device will open.

To start updating the router firmware, you need to go to the following menu items: “ System» -> « Software Update».

In the firmware update menu, click on the " Choose"We will be required to find the downloaded file and open it. If the name appears next to the selection button, then everything is in order. To start the process, click on “ Update».

All that remains is to wait for the firmware update to finish and reboot the router.

The next time you enter the settings, use the standard password and check the current software version.

Also, do not forget that all settings are abandoned. Therefore, be sure not to forget. Leave comments if you have questions or need help finding the right firmware.

Updating the firmware of the D-Link Dir 300 router

Connect the computer and router by connecting the cable to network card computer and LANport router.

1. Check the settings network connection on the computer.

Windows XP (Control Panel - Network and Internet - Network Connections - Software Connections local network.)

Windows 7/8 (Control Panel - Network and Internet - Network and Sharing Center - Change adapter settings - Local Area Connection)

Right-click on the local network connection - select " properties" Double click on " Internet Protocol Version 4" Set the switches to mode automatic receiptIP addresses.

2. Launch any Internet browser ( Internet Explorer,Opera, Google Chrome and others). In the address bar of the browser we enter the IP address of the router - 192.168.0.1 and press the key Enter(for the initial setup of the router, Internet access is not required).

3. Login to the router.

3.1. If you are setting up the router for the first time, then the first time you log in it will ask you to set a login password. Standard login/password pair: admin/admin

3.2. If the router has already been configured before, then enter your username and password to log in. Default loginadmin, passwordadmin.

4. Remove existing connections.

Go to " Net»-« WAN" Check the boxes next to the created connections and click on the " Delete»

5. After deleting, click on the “ Add" In the drop-down menu, select the connection type " PPPoE».

6. In the window that opens, in the section Ethernet, you must specify the MAC of your computer, otherwise you will have to contact technical support to unbind the MAC address.

Fill in the fields Username And password. The data is provided in the contract. MTU must be equal 1492 . Press the button Apply.

7. Connect the internet cable to WANport router. The connection will change to the “Connected” status.

8. For correct operation IP-TV services, both via cable and Wi-Fi, you need to add one more connection - Static IP. Press the button again Add.

Connection type - Static IP

9. In the window that opens, fill in the windows and click the “ Apply".

IP-address: 192.168.1.10

Network mask: 255.255.255.0

IP-gateway address: 192.168.1.9

PrimaryDNS- server: 188.168.69.69

SecondaryDNS- server: 188.168.81.2

Check the box " Turn onIGMP»

After application, the two connections should be in the status " Connected" Default Gateway PPPoE

10. To configure Wi- Fi. Go to the section " Wi- Fi»-« basic settings" In the window SSID you can customize the name of your point. Click " Apply».

To set a password to access the Wi-Fi point, go to the " Wi- Fi»-« Security Settings" On the menu " network authentication» select « WPA- PSK/ WPA2- PSK mixed" Enter your password in the " encryption keyPSK". Click the button Apply.

11. To complete the settings, save the changes. At the top of the screen, click on the inscription “ Save».

12. In order to find your network, you need to click on the icon Net located next to the clock, in the lower right corner, and select your Wi-Fi network. Click on it with the left mouse button, then Connection, and enter your network password.

First of all, let's look at the general router connection diagram.

As you can see, everything is quite simple, connect your computer/laptop to any LAN port (there are 4 of them) using a network cable (it is included), insert the provider’s network cord into the WAN port, connect the router to a 220V network and press the Power button.

Now I propose to disassemble the router indication.

Indicator - Power
Does not burn- Dlink dir300 is disabled.
Lit- Power included.

Indicator - WPS
Flashes slowly - Trying to establish a Wi-Fi connection using the WPS function
Does not burn- The WPS function is not used.

Indicator - Internet

Lit- Connection established
Flashing- WAN interface is active
Does not burn- The network cable is not connected.

Indicator - Wireless network Wi-Fi
Does not burn- Wi-Fi network is turned off.

Flashing- Data is being transferred via Wi-Fi

LAN Ports 1-4 Connecting to network connectors
Does not burn- The cable is not connected to the corresponding connector of the Internet center, or the network connection is not established.
Lights up or flashes - The network connection has been established and information is being transferred.

Next, I suggest moving on to setting up the router; to do this, you need to configureautomatic retrieval of network settings . After that, open any browser (IE, Chrome, Yandex, Firefox, Opera) and write the IP address of the router in the address bar 192.168.0.1 . If you are connecting to the web interface for the first time, you will be prompted to change your login password. I recommend using a complex password - at least 8 characters using letters, numbers and special words. signs.

If you have already connected, enter the login - admin and the password - the one you specified (admin is used by default). If the web interface uses a language that does not suit you, click the " button in the upper right corner Language", and select the desired language.

To save the settings, click the " button Save". In the future, do not forget to press the button " Save".

Firmware update on the Dlink dir 300 D1 router.

For more stable and secure operation of the router, the first thing you need to do is update the router firmware. To do this, look at what firmware version you have installed, this information is in the main window of the web interface.

Next, find out the hardware revision (H/W) of your router. To do this, look at the affixed label located at the bottom of the router. This sticker has an inscription that begins with “H/W Ver.:”. The letter and number following it indicate the hardware revision (in this example, Dlink dir-300 D1).

Then download the latest firmware version according to your revision.

Important!!! You CANNOT install firmware of different hardware revisions than yours, this can lead to a complete failure of your device. After this, it will be possible to restore the router only for money by contacting a specialized service center.

After that, on the router’s web interface, click on the version of the installed firmware.

Click " Review"specify the path where you have the firmware file (file with extension.bin). Then click " Update".

Attention!!! While updating the firmware, do not turn off your computer/laptop or router. This may damage the router and render it inoperable.

The firmware update will take about 2-3 minutes, during the update the router will reboot. Once the router boots up, you will see the updated firmware version.

Setting up Internet on Dlink dir-300.

To configure the Internet and Wi-Fi, you need to go to the router’s web interface in the menu "Net" press the button "Click"n Connect".

Then make sure that you have inserted the ISP cable into the WAN port and click " Further".

After this, you need to indicate the type of Internet connection; you can find out this information from the provider’s contract or contact technical support. provider support.

Confirm the specified settings.

If the setup is successful, you will see a window confirming Internet access. Don't forget to press the " Save".

Setting up a Wi-Fi network on Dlink dir-300 D1

D-Link DIR-300 routers of different revisions in latest versions firmware 2.5.11, 2.5.12 and 2.5.19 depending on the model, have acquired a new web interface. Despite the fact that setting up the router here is done in almost the same way as in previous versions of the interface, it confuses some, and there are no instructions specifically for the new firmware. (Instructions for setting up the same router with previous versions firmware are available in the “D-Link” section on this site).

This instruction will show you step by step how to configure the DIR-300 wireless router with new version firmware, set a password for Wi-Fi, and also set up IPTV. The setting is shown for Beeline and Rostelecom (should also be suitable for other providers using a PPPoE connection).

How to connect a router

First of all, you should connect the router for setup. This is easy to do: connect the Internet cable to the “Internet” port, and use the included network cable by connecting one of its ends to the computer’s network card and the other to one of the LAN connectors on the D-Link DIR-300.

Plug in the router, wait a while for it to boot, then enter 192.168.0.1 in the address bar in any browser to enter the settings web interface. You will see a request for a login and password; the default login and password are admin and admin, respectively. If necessary, switch the settings interface to Russian.

If you cannot enter the router settings, then .

If your login and password do not work when entering the router settings, try.

Setting up DIR-300 with new firmware for Beeline

Let's start with setting up the Beeline connection. First of all, if you have such an Internet connection running on your computer (that is, you are running Beeline home Internet on the computer itself), then disable it and do not start it in the future, after setting it up: the connection to the Internet will be established by the router itself, and you There will be access to the Internet via the local network.

To set up a Beeline L2TP connection on a DIR-300 with firmware 2.5.11, 2.5.12 and 2.5.19, go to the “Network” - “WAN” section, select the Dynamic IP connection that is already there and click “Delete”.

After deleting, click the “Add” button, then set the following parameters for the connection:

• Connection type - L2TP + Dynamic IP
• Interface - Internet
• Name - any
• Username is your login from Beeline Internet.
• Password and password confirmation - Beeline Internet password.
• VPN server address - l2tp.internet.beeline.ru

All other parameters can be left unchanged. If there is any doubt about their correctness, check the screenshot below.

After the settings are made, save the connection and be sure to click on the “Device configuration has been changed” notification and click “Save” to save the settings made.

If everything was done correctly, and the Beeline connection on the computer is broken, then after a short time in the Network - WAN section you will be able to see that the newly created L2TP connection has the “Connected” status, which means the connection setup is completed and the Internet is already accessible from this computer .

Further steps for setting up a Wi-Fi password are described immediately after the section on setting up a Rostelecom Internet connection.

Setting up the DIR-300 Rostelecom router

(the same settings should be suitable for other providers using PPPoE, for example, Dom.ru, TTK in some regions

In order to set up a high-speed Internet connection from Rostelecom (PPPoE) on the DIR-300 in the new firmware, first of all, disconnect (if it is connected) this connection on the computer and do not connect it in the future - after setting up the router, it will install it itself, the steps on you don’t need a computer for this (the Internet will be like a local network) and can cause problems.

In the router settings, go to the Network - WAN section, select the existing Dynamic IP connection there and delete it. After that, click “Add” and set the following connection parameters:

• Connection type - PPPoE
• Interface - Internet
• Any name.
• Username - your login for the Rostelecom Internet.
• Password and password confirmation - your password for the Internet.

There is no need to change any other parameters. Click “Apply”, and then click on the notification that the device configuration has been changed and click the “Save” button (this is required, otherwise the settings will be reset upon reboot).

With the Internet configured on the router, you can check the status of the created connection in the Network - WAN or in “Status”. If the connection is successfully established, then the Internet is already available.

The next step is to configure your Wi-Fi settings.

Wi-Fi setup, wireless network password

To configure settings wireless network go to the “Wi-Fi” section. The two items that interest us are “Basic Settings” and “Security Settings”.

In “Basic Settings” you can set the name of the Wi-Fi access point instead of the standard “DIR-300” (i.e. the name of the network to which you will connect). This is done in the SSID field.

Do not use Cyrillic for the network name, as this does not always work (for example, some devices may not connect).

After that, go to your Wi-Fi security settings and set the following options.